Configuring the IP GW blade

Step one: Log in to the IP GW blade

All administration of the IP GW blade is performed through the web interface. To log in to the web interface of the IP GW blade:

1Log in to the Supervisor’s web interface.

2Go to Hardware > Blades and click the IP address of the IP GW blade.

3Click Click here to log in, and then click Change log in and enter the user name admin with no password.

Codian recommends that you change the admin account to use a

ipassword as soon as possible. To do that, go to Users, click the admin link, and provide the required user information.

Step two: Configure an H.323 gatekeeper or SIP registrar (optional)

If you have H.323 endpoints, using an H.323 gatekeeper can make it easier for callers to make their call. You can configure the IP GW blade to use an external gatekeeper or its own built-in gatekeeper.

If you have SIP endpoints, using a SIP registrar can make it easier for callers to make their call.

To configure the use of an H.323 gatekeeper, go to Settings > H.323 To configure the use of a SIP registrar, go to Settings > SIP

For more information refer to the online help topics: “Configuring H.323 settings” and “Configuring SIP settings”.