TANDBERG MSE 8350 manual Inserting a blade into the chassis

Page 9

Installing the IP GW blade

5Using a No.1 Phillips screwdriver, tighten the screws in the retaining latches with a clockwise quarter turn.

Figure 2: Inserting a blade into the chassis

Figure 3: Closing the retaining latches on the front of a blade

5

Image 9

Contents Codian IP Gateway Codian IP Gateway Tandberg Table of contents General information About the MSE 8350 IP GW bladePort and LED location LED behavior FDX Step one Install the IP GW blade into the MSE 8000 chassis Installing the IP GW bladeInserting a blade into the chassis Step two Connect to Ethernet Ports a and B Initial configuration Step one Configure Ethernet Ports a and BStep two Configure the default gateway and routes optional Step one Log in to the IP GW blade Configuring the IP GW bladeStep four Configure an operator optional Step three Configure the auto attendant menus optionalStep five Add endpoints and call groups optional Step six Configure the dial planChecking for updates Troubleshooting and technical support information Using the event log to help solve a problemGetting more help 61-0018-04