Table of contents |
|
General information | 1 |
About the MSE 8350 IP GW blade | 1 |
Port and LED location | 1 |
LED behavior | 2 |
Installing the IP GW blade | 4 |
Step one: Install the IP GW blade into the MSE 8000 chassis | 4 |
Step two: Connect to Ethernet Ports A and B | 6 |
Initial configuration | 7 |
Step one: Configure Ethernet Ports A and B | 7 |
Step two: Configure the default gateway and routes (optional) | 7 |
Configuring the IP GW blade | 8 |
Step one: Log in to the IP GW blade | 8 |
Step two: Configure an H.323 gatekeeper or SIP registrar (optional) | 8 |
Step three: Configure the auto attendant menus (optional) | 9 |
Step four: Configure an operator (optional) | 9 |
Step five: Add endpoints and call groups (optional) | 10 |
Step six: Configure the dial plan | 10 |
Checking for updates | 11 |
Troubleshooting and technical support information | 12 |
Using the event log to help solve a problem | 12 |
Getting more help | 12 |