Sharp XG-V10XU operation manual Introduction, English

Page 2
U.S.A. ONLY
U.S.A. ONLY
U.S.A. ONLY
U.S.A. ONLY

Before using the LCD projector, please read this operation manual carefully.

Important

Information

 

 

 

 

Introduction

IMPORTANT

For your assistance in reporting the loss or theft of your Color LCD Projector, please record the Serial Number located on the bottom of the projector and retain this information. Before recycling the packaging, please be sure that you have checked the contents of the carton thoroughly against the list of “Supplied Accessories” on page 13.

ENGLISH

Model No.: XG-V10XU

Serial No.:

There are two important reasons for prompt warranty registration of your new SHARP LCD Projector, using the REGISTRATION CARD packed with the projector.

1.WARRANTY

This is to assure that you immediately receive the full benefit of the parts, service and labor warranty applicable to your purchase.

2.CONSUMER PRODUCT SAFETY ACT

To ensure that you will promptly receive any safety notification of inspection, modification, or recall that SHARP may be required to give under the 1972 Consumer Product Safety Act, PLEASE

READ CAREFULLY THE IMPORTANT “LIMITED WARRANTY” CLAUSE.

WARNING: High brightness light source. Do not stare into the beam of light, or view directly. Be especially careful that children do not stare directly into the beam of light.

WARNING: To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.

See bottom of actual set.

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT REMOVE SCREWS

EXCEPT SPECIFIED USER

SERVICE SCREW.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER.

NO USER-SERVICEABLE PARTS EXCEPT LAMP UNIT.

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk or electric shock to persons.

The exclamation point within a triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate this equip- ment.

INFORMATION

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful inter- ference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the operation manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense.

The enclosed computer cable must be used with the device. The cable is provided to ensure that the device complies with FCC Class A verification.

E-1

Page 1 Page 3
Image 2
Page 1 Page 3
Contents XG-V10XU Introduction EnglishPower Sources CleaningAccessories Power-Cord ProtectionImportant Safeguards Using the Terminal Cover Temperature Monitor FunctionUsing the Carrying Handle Lamp Monitor FunctionOutstanding Features High-end LCD Projector with Ultra High BrightnessNetwork Capability Contents Maintenance For other operating systems For other languages To Install Acrobat Reader from the CD-ROMFor Windows For Macintosh Part Names ProjectorPart Names Inserting the batteries Remote ControlBattery Cover Compartment Supplied Accessories RRMCG1564CESAConnecting the Projector to a Computer Power SupplyConnecting the Power Cord ConnectionsPlug and Play function when connecting to a 15-pin terminal Projecting Computer ImagesConnecting to a computer using the RS-232CPort ComputerWatching Video Images and Laser Disc Images Laser disc playerFor Better Sound Connecting to an amplifier and other audio componentsWatching DVD and Digital TV Images AmplifierPress Power on Power ON/OFFTurning on the Main Power Press Power OFFUsing the Adjustment Feet Setting Up the ScreenUsing the Adjustment Feet DownThrow Distance Adjusting the Projection DistanceStandard Setup Front Projection Computer and Video InputComputer and Video Adjusting the Projection DistanceThrow distance ratio 1.9 to InputAN-LV18MX Throw distance ratio 0.9AN-LV26EZ Throw distance ratio 1.2 to 1.4AN-LV36EZ Throw distance ratio 1.7 to 2.7AN-LV55EZ Throw distance ratio 2.6 to 3.7AN-LV80EZ Throw distance ratio 3.8 to 5.3Upper and Lower Lens Shift Position Upper and Lower Lens Shift Position Ceiling MountDigital Shift Digital Image AdjustmentsLens Button Rear Projection Projection Using a MirrorImage Projection Ceiling-mount ProjectionAdjusting the Volume Using the Operation ButtonsSelecting the Input Signal Source Projector Remote ControlProjected Image Superimposing a Black ScreenDisplaying a Still Image Magnifying a Specific Portion of an Image On-screen Display Remote ControlWhen Input 1.2.3 or Input 4.5.6 is pressed ProjectorAdjusting the Picture Aspect Ratio ComputerGamma Modes Projector On-screen Display Remote ControlGamma Correction Function Using the Remote Control as a Wireless Mouse Selecting the Remote Control ModeOperating the Remote Control Remote Control/Mouse Receiver PositioningMouse mode buttons Use as a Wireless MouseOperating the Remote Control Connecting to the USB port on a PC or Macintosh Connecting the Mouse ReceiverConnecting the Remote Mouse Receiver Connecting to the PS/2 port on a PCWired Remote Control Using as a Laser PointerUsing as a Wired Remote Control Use as a Laser PointerBasic Operations Using the GUI Graphical User Interface Menu ScreenInput 1, 2 RGB or 3 Digital mode Input 4, 5 Video mode GUI On-screen DisplayMain menu Items on the Input 1, 2 or 3 Mode Menu BarMenu Bars Sub menuItems on the Input 4 or 5 Mode Menu Bar Menu BarsGUI On-screen Display RGB input in Input 1 or 2 mode Adjusting the PictureDescription of Adjustment Items Description of Color Temperature Adjusting the Color TemperatureAdjusting the Picture Projector Remote Control GUI On-screen DisplayProgressive Mode Selecting the Signal TypeGUI On-screen Display Projector Remote Control Adjusting the Computer Images RGB menu only Saving the adjustment setting Saving and Selecting Adjustment SettingsAdjusting the Computer Images RGB menu only Selecting a saved settingSpecial Mode Adjustment Checking the Input SignalOn-screen Display GUI On-screen Display When Auto Sync is set to onAuto Sync Display Function Adjusting the Sound Displaying Dual Pictures RGB menu only Reducing Image Noise Video menu only Description of OSD Display Setting the Video Signal Video menu onlyTurning On/Off the On-screen Display Description of Background Images Selecting a Background ImageSelecting a Startup Image Description of Startup ImagesDescription of Automatic Power Shutoff Selecting the Economy ModeAutomatic Power Shutoff Function Monitor Out/RS-232C Off FunctionID No. Display Off Function Selecting the Economy ModeReversing/Inverting Projected Images Description of ID No. DisplaySelecting the On-screen Display Language Displaying the Adjustment Settings To exit from the GUI, press MenuDeselecting Inputs Useful FeaturesLocking the Operation Buttons on the Projector Description of Keylock LevelsSelecting the Transmission Speed RS-232C Changing the Password Protecting Important Settings with a PasswordSetting the Password Setting the PasswordLAN Board 10BASE-T Setting Up the Optional BoardsNetwork Function SDI BoardControling Multiple Projectors with ID Numbers Setting the Stacking ModeSetting the ID No Displaying the Break Time Projector Remote Control On-screen Display Menu WindowProjector Remote Control When selecting Sharp default image Operating the Network Function InternetMultiple and group projector control via computer Operating the Network FunctionStack Projection Videowall Maintenance Indicator Condition Problem Possible Solution Lamp/Maintenance IndicatorsMaintenance Indicators Confirming the Lamp Usage Time Lamp MaintenanceCondition Problem Possible Solution LampMode can be set to double the effective lamp usage Setting the Lamp ModeDescription of Lamp Mode Replacing the LampReplacing the Lamp Removing and installing the lamp unitTurn on the main power Attach the lamp cage coverReplacing the front air filter Unplug the power cordReplacing the Air Filter For Sharp Assistance U.S.A. only TroubleshootingProblem Check Creative Presentations Guide to Effective PresentationsTypes of Presentations Guide to Effective Presentations FontsSet-Up Good BadRehearsing & Delivery Presentation TipsConnecting Pin Assignments DVI Port 29-pinPC control RS-232C Specifications and Command SettingsCommands Communication conditionsRS-232C Specifications and Command Settings Model Name Sharp remote control signal format Wired Remote Control Terminal SpecificationsSpecifications of wired remote control input Function and transmission codesComputer Compatibility Chart VGADimensions Units inches mmSpecifications PAL/PAL 60/PAL-M/PAL-N/SECAM/NTSC 3.58/NTSCGlossary Aspect ratioIndex DOT by DOTSharp Corporation

XG-V10XU specifications

The Sharp XG-V10XU is a high-performance LCD projector designed for professional environments, offering a blend of advanced features and user-friendly technologies that enhance presentations and visual experiences. With a native resolution of XGA (1024x768), the projector provides clear and precise image quality, making it suitable for both business applications and educational purposes.

One of the standout features of the XG-V10XU is its impressive brightness, boasting 2500 ANSI lumens. This allows the projector to perform well in various lighting conditions, ensuring that images and presentations remain visible even in well-lit rooms. Coupled with a high contrast ratio of 400:1, the projector delivers vibrant colors and deep blacks, enhancing overall image depth and clarity.

The XG-V10XU employs advanced image technologies, including a 3LCD system, which works to create rich and accurate color reproduction. This technology minimizes color break-up and ensures that the projector can handle a wide range of media, from detailed graphs to vivid videos, with excellent fidelity. Additionally, the projector features various image modes that allow users to adjust settings to match different content types, such as presentations, video playback, or photo exhibitions.

Versatility is another strong point of the Sharp XG-V10XU. It supports a variety of input sources, including VGA, composite video, S-Video, and HDMI, making it compatible with multiple devices such as laptops, DVD players, and gaming consoles. This flexibility is augmented by its built-in 10-watt speaker, enabling users to present audio alongside visuals without needing external sound equipment.

Portability is also a key characteristic of the XG-V10XU. Weighing in at around 2.8 kg, it is designed for ease of transport, making it an excellent choice for traveling professionals or educators who need to move between locations. The projector’s compact dimensions do not compromise build quality, as Sharp incorporates durable materials to ensure longevity under regular use.

Additionally, the Sharp XG-V10XU includes features such as a digital keystone correction to adjust image distortions, facilitating quick setup in varied environments. With a lengthy lamp life of approximately 4000 hours, maintenance is minimized, allowing users to focus on their presentations rather than equipment downtime. Overall, the Sharp XG-V10XU stands out as a reliable and effective solution for those in need of a quality projector that combines ease of use with exceptional performance.
Top Page Image Contents