Sharp XG-V10XU Removing and installing the lamp unit, Replacing the Lamp, Turn on the main power

Page 73

Replacing the Lamp

Removing and installing the lamp unit

CAUTION

•Be sure to remove the lamp cage by the handle. Be sure not to touch the glass surface of the lamp cage or the inside of the projector.

•To avoid injury to yourself and damage to the lamp, be sure to carefully follow the steps below.

•Replace the lamp more safely by unplugging the power cord after turning off the main power.

 

 

 

Lamp 1 Lamp 2

 

 

 

High angle view

1

Turn off the power.

Turn off the main

Remove the lamp cage

 

2 power.

3 cover.

Press POWER OFF. Wait until

Turn off the MAIN POWER

Loosen the user service screw

the cooling fan stops.

switch. (Unplug the power cord.)

that secures the lamp cage

 

 

 

cover on the back of the

 

 

 

projector. Then slide the cover in

 

 

 

the direction of the arrow (to the

 

or

 

open mark).

 

 

 

Remove the lamp

Attach the lamp cage cover

6

Press POWER ON on projector. LAMP

4 cage.

5 and turn on the main power.

REPLACEMENT indicator flashes red.

 

 

 

Then press ENTER to reset lamp timer.

Remove the securing screws

Slide the lamp cage cover in the

Press POWER ON, and then

from the lamp cage. Hold the

direction of the arrow (to the

press ENTER on the projector.

lamp cage by the handle and

close mark) on the back of the

 

 

pull it horizontally towards you.

projector. Then turn on the MAIN

 

ON

 

POWER switch.

 

 

 

 

Securing screws

 

 

 

Securing screw

 

 

ENTER

 

 

 

Turn off the main power again and

Insert the new lamp

 

Attach the lamp cage

7 remove the lamp cage cover.

8 cage.

9 cover.

Turn off the main power switch

Press the lamp cage firmly into

Slide the lamp cage cover in the

and slide the lamp cage cover

the lamp cage compartment.

direction of the arrow (to the

in the direction of the arrow (to

Fasten the securing screws.

close mark) on the back of the

the open mark) on the back of

 

projector. Then tighten the user

the projector.

 

service screw.

Troubleshooting

Maintenance&

 

 

•You need to reset lamp timer every time when replacing the lamp and confirm it to be reset on “Lamp Timer” menu.

E-72

Page 72 Page 74
Image 73
Page 72 Page 74
Contents XG-V10XU English IntroductionAccessories CleaningPower Sources Power-Cord ProtectionImportant Safeguards Using the Carrying Handle Temperature Monitor FunctionUsing the Terminal Cover Lamp Monitor FunctionHigh-end LCD Projector with Ultra High Brightness Outstanding FeaturesNetwork Capability Contents Maintenance For Windows For Macintosh To Install Acrobat Reader from the CD-ROMFor other operating systems For other languages Projector Part NamesPart Names Battery Cover Compartment Remote ControlInserting the batteries RRMCG1564CESA Supplied AccessoriesConnecting the Power Cord Power SupplyConnecting the Projector to a Computer ConnectionsProjecting Computer Images Plug and Play function when connecting to a 15-pin terminalComputer Connecting to a computer using the RS-232CPortLaser disc player Watching Video Images and Laser Disc ImagesWatching DVD and Digital TV Images Connecting to an amplifier and other audio componentsFor Better Sound AmplifierTurning on the Main Power Power ON/OFFPress Power on Press Power OFFUsing the Adjustment Feet Setting Up the ScreenUsing the Adjustment Feet DownStandard Setup Front Projection Adjusting the Projection DistanceThrow Distance Computer and Video InputThrow distance ratio 1.9 to Adjusting the Projection DistanceComputer and Video InputThrow distance ratio 0.9 AN-LV18MXThrow distance ratio 1.2 to 1.4 AN-LV26EZThrow distance ratio 1.7 to 2.7 AN-LV36EZThrow distance ratio 2.6 to 3.7 AN-LV55EZThrow distance ratio 3.8 to 5.3 AN-LV80EZUpper and Lower Lens Shift Position Ceiling Mount Upper and Lower Lens Shift PositionLens Button Digital Image AdjustmentsDigital Shift Image Projection Projection Using a MirrorRear Projection Ceiling-mount ProjectionSelecting the Input Signal Source Using the Operation ButtonsAdjusting the Volume Projector Remote ControlDisplaying a Still Image Superimposing a Black ScreenProjected Image When Input 1.2.3 or Input 4.5.6 is pressed On-screen Display Remote ControlMagnifying a Specific Portion of an Image ProjectorComputer Adjusting the Picture Aspect RatioGamma Correction Function Projector On-screen Display Remote ControlGamma Modes Operating the Remote Control Selecting the Remote Control ModeUsing the Remote Control as a Wireless Mouse Remote Control/Mouse Receiver PositioningOperating the Remote Control Use as a Wireless MouseMouse mode buttons Connecting the Remote Mouse Receiver Connecting the Mouse ReceiverConnecting to the USB port on a PC or Macintosh Connecting to the PS/2 port on a PCUsing as a Wired Remote Control Using as a Laser PointerWired Remote Control Use as a Laser PointerInput 1, 2 RGB or 3 Digital mode Input 4, 5 Video mode Using the GUI Graphical User Interface Menu ScreenBasic Operations GUI On-screen DisplayMenu Bars Items on the Input 1, 2 or 3 Mode Menu BarMain menu Sub menuMenu Bars Items on the Input 4 or 5 Mode Menu BarDescription of Adjustment Items Adjusting the PictureGUI On-screen Display RGB input in Input 1 or 2 mode Adjusting the Picture Adjusting the Color TemperatureDescription of Color Temperature Projector Remote Control GUI On-screen DisplayGUI On-screen Display Projector Remote Control Selecting the Signal TypeProgressive Mode Adjusting the Computer Images RGB menu only Adjusting the Computer Images RGB menu only Saving and Selecting Adjustment SettingsSaving the adjustment setting Selecting a saved settingChecking the Input Signal Special Mode AdjustmentAuto Sync Display Function When Auto Sync is set to onOn-screen Display GUI On-screen Display Adjusting the Sound Displaying Dual Pictures RGB menu only Reducing Image Noise Video menu only Turning On/Off the On-screen Display Setting the Video Signal Video menu onlyDescription of OSD Display Selecting a Startup Image Selecting a Background ImageDescription of Background Images Description of Startup ImagesAutomatic Power Shutoff Function Selecting the Economy ModeDescription of Automatic Power Shutoff Monitor Out/RS-232C Off FunctionReversing/Inverting Projected Images Selecting the Economy ModeID No. Display Off Function Description of ID No. DisplaySelecting the On-screen Display Language To exit from the GUI, press Menu Displaying the Adjustment SettingsLocking the Operation Buttons on the Projector Useful FeaturesDeselecting Inputs Description of Keylock LevelsSelecting the Transmission Speed RS-232C Setting the Password Protecting Important Settings with a PasswordChanging the Password Setting the PasswordNetwork Function Setting Up the Optional BoardsLAN Board 10BASE-T SDI BoardSetting the ID No Setting the Stacking ModeControling Multiple Projectors with ID Numbers Projector Remote Control When selecting Sharp default image Projector Remote Control On-screen Display Menu WindowDisplaying the Break Time Internet Operating the Network FunctionOperating the Network Function Multiple and group projector control via computerStack Projection Videowall Maintenance Indicators Lamp/Maintenance IndicatorsMaintenance Indicator Condition Problem Possible Solution Condition Problem Possible Solution Lamp MaintenanceConfirming the Lamp Usage Time LampDescription of Lamp Mode Setting the Lamp ModeMode can be set to double the effective lamp usage Replacing the LampTurn on the main power Removing and installing the lamp unitReplacing the Lamp Attach the lamp cage coverReplacing the Air Filter Unplug the power cordReplacing the front air filter Problem Check TroubleshootingFor Sharp Assistance U.S.A. only Types of Presentations Guide to Effective PresentationsCreative Presentations Fonts Guide to Effective PresentationsGood Bad Set-UpPresentation Tips Rehearsing & DeliveryDVI Port 29-pin Connecting Pin AssignmentsCommands RS-232C Specifications and Command SettingsPC control Communication conditionsRS-232C Specifications and Command Settings Model Name Specifications of wired remote control input Wired Remote Control Terminal SpecificationsSharp remote control signal format Function and transmission codesVGA Computer Compatibility ChartUnits inches mm DimensionsPAL/PAL 60/PAL-M/PAL-N/SECAM/NTSC 3.58/NTSC SpecificationsAspect ratio GlossaryDOT by DOT IndexSharp Corporation

XG-V10XU specifications

The Sharp XG-V10XU is a high-performance LCD projector designed for professional environments, offering a blend of advanced features and user-friendly technologies that enhance presentations and visual experiences. With a native resolution of XGA (1024x768), the projector provides clear and precise image quality, making it suitable for both business applications and educational purposes.

One of the standout features of the XG-V10XU is its impressive brightness, boasting 2500 ANSI lumens. This allows the projector to perform well in various lighting conditions, ensuring that images and presentations remain visible even in well-lit rooms. Coupled with a high contrast ratio of 400:1, the projector delivers vibrant colors and deep blacks, enhancing overall image depth and clarity.

The XG-V10XU employs advanced image technologies, including a 3LCD system, which works to create rich and accurate color reproduction. This technology minimizes color break-up and ensures that the projector can handle a wide range of media, from detailed graphs to vivid videos, with excellent fidelity. Additionally, the projector features various image modes that allow users to adjust settings to match different content types, such as presentations, video playback, or photo exhibitions.

Versatility is another strong point of the Sharp XG-V10XU. It supports a variety of input sources, including VGA, composite video, S-Video, and HDMI, making it compatible with multiple devices such as laptops, DVD players, and gaming consoles. This flexibility is augmented by its built-in 10-watt speaker, enabling users to present audio alongside visuals without needing external sound equipment.

Portability is also a key characteristic of the XG-V10XU. Weighing in at around 2.8 kg, it is designed for ease of transport, making it an excellent choice for traveling professionals or educators who need to move between locations. The projector’s compact dimensions do not compromise build quality, as Sharp incorporates durable materials to ensure longevity under regular use.

Additionally, the Sharp XG-V10XU includes features such as a digital keystone correction to adjust image distortions, facilitating quick setup in varied environments. With a lengthy lamp life of approximately 4000 hours, maintenance is minimized, allowing users to focus on their presentations rather than equipment downtime. Overall, the Sharp XG-V10XU stands out as a reliable and effective solution for those in need of a quality projector that combines ease of use with exceptional performance.
Top Page Image Contents