Sharp XG-V10XU operation manual Set-Up, Good Bad

Page 78

Guide to Effective Presentations

Good

Bad

Good

c. Set-Up

Presentation from SHARP

Appendix

E-77

When giving a presentation, you need to set the stage both figuratively and literally for success. The way you set up a presentation room will have a great impact on the audience’s perception of you and your message. By manipulating the placement and use of the following tools, you will improve the impact of your presentation.

Lighting—Good lighting is an important component of a successful presentation. You should strive to create an unequal distribution of light. An audience should always see as much of the presenter’s face as possible, so most of the light should be focused on you. Because it is important for you to be able to read the audience’s faces and body language, some light should be shed upon them. However, no light should shine on the screen.

Stage— When presenting on the same level surface that your audience is on, most people can only see the top one-third of your body. Therefore, it is recommended that when giving a presentation to an audience of 25 or more, you stand on a stage or platform. As more of your body is visible, the easier it is to communicate with an audience.

Podiums—The best presenters avoid podiums because they hide 75% of the body and restrict movement. However, many people feel more comfortable with a podium to hold their notes and hide their discomfort. If you must use a podium, angle it at 45 degrees to the audience so that you are not completely hidden.

Visuals—It is imperative that you make sure your visuals are large enough and projected far enough for the audience to see. Eight times the height of an image is the optimal viewing distance to read 24 point type. The bottom of a screen should be at least 6 (1.8 meters) above the floor.

Screen—The screen should always be in the center of the room so that all audience members can see it. Because people read from left to right, you should always stand to the audience’s left when discussing visuals.

Seating—Arrange seating according to the dynamics of your presentation. If the presentation is more than half-a-day, use classroom style seating—a chair and a desk. If you would like to encourage audience interaction, use chevron seating, angling the chairs into a “V” shape. When you have a very small audience, a “U” shaped arrangement will increase interchange.

Image 78
Contents XG-V10XU Introduction EnglishPower Sources CleaningAccessories Power-Cord ProtectionImportant Safeguards Using the Terminal Cover Temperature Monitor FunctionUsing the Carrying Handle Lamp Monitor FunctionOutstanding Features High-end LCD Projector with Ultra High BrightnessNetwork Capability Contents Maintenance To Install Acrobat Reader from the CD-ROM For Windows For MacintoshFor other operating systems For other languages Part Names ProjectorPart Names Remote Control Battery Cover CompartmentInserting the batteries Supplied Accessories RRMCG1564CESAConnecting the Projector to a Computer Power SupplyConnecting the Power Cord ConnectionsPlug and Play function when connecting to a 15-pin terminal Projecting Computer ImagesConnecting to a computer using the RS-232CPort ComputerWatching Video Images and Laser Disc Images Laser disc playerFor Better Sound Connecting to an amplifier and other audio componentsWatching DVD and Digital TV Images AmplifierPress Power on Power ON/OFFTurning on the Main Power Press Power OFFUsing the Adjustment Feet Setting Up the ScreenUsing the Adjustment Feet DownThrow Distance Adjusting the Projection DistanceStandard Setup Front Projection Computer and Video InputComputer and Video Adjusting the Projection DistanceThrow distance ratio 1.9 to InputAN-LV18MX Throw distance ratio 0.9AN-LV26EZ Throw distance ratio 1.2 to 1.4AN-LV36EZ Throw distance ratio 1.7 to 2.7AN-LV55EZ Throw distance ratio 2.6 to 3.7AN-LV80EZ Throw distance ratio 3.8 to 5.3Upper and Lower Lens Shift Position Upper and Lower Lens Shift Position Ceiling MountDigital Image Adjustments Lens ButtonDigital Shift Rear Projection Projection Using a MirrorImage Projection Ceiling-mount ProjectionAdjusting the Volume Using the Operation ButtonsSelecting the Input Signal Source Projector Remote ControlSuperimposing a Black Screen Displaying a Still ImageProjected Image Magnifying a Specific Portion of an Image On-screen Display Remote ControlWhen Input 1.2.3 or Input 4.5.6 is pressed ProjectorAdjusting the Picture Aspect Ratio ComputerProjector On-screen Display Remote Control Gamma Correction FunctionGamma Modes Using the Remote Control as a Wireless Mouse Selecting the Remote Control ModeOperating the Remote Control Remote Control/Mouse Receiver PositioningUse as a Wireless Mouse Operating the Remote ControlMouse mode buttons Connecting to the USB port on a PC or Macintosh Connecting the Mouse ReceiverConnecting the Remote Mouse Receiver Connecting to the PS/2 port on a PCWired Remote Control Using as a Laser PointerUsing as a Wired Remote Control Use as a Laser PointerBasic Operations Using the GUI Graphical User Interface Menu ScreenInput 1, 2 RGB or 3 Digital mode Input 4, 5 Video mode GUI On-screen DisplayMain menu Items on the Input 1, 2 or 3 Mode Menu BarMenu Bars Sub menuItems on the Input 4 or 5 Mode Menu Bar Menu BarsAdjusting the Picture Description of Adjustment ItemsGUI On-screen Display RGB input in Input 1 or 2 mode Description of Color Temperature Adjusting the Color TemperatureAdjusting the Picture Projector Remote Control GUI On-screen DisplaySelecting the Signal Type GUI On-screen Display Projector Remote ControlProgressive Mode Adjusting the Computer Images RGB menu only Saving the adjustment setting Saving and Selecting Adjustment SettingsAdjusting the Computer Images RGB menu only Selecting a saved settingSpecial Mode Adjustment Checking the Input SignalWhen Auto Sync is set to on Auto Sync Display FunctionOn-screen Display GUI On-screen Display Adjusting the Sound Displaying Dual Pictures RGB menu only Reducing Image Noise Video menu only Setting the Video Signal Video menu only Turning On/Off the On-screen DisplayDescription of OSD Display Description of Background Images Selecting a Background ImageSelecting a Startup Image Description of Startup ImagesDescription of Automatic Power Shutoff Selecting the Economy ModeAutomatic Power Shutoff Function Monitor Out/RS-232C Off FunctionID No. Display Off Function Selecting the Economy ModeReversing/Inverting Projected Images Description of ID No. DisplaySelecting the On-screen Display Language Displaying the Adjustment Settings To exit from the GUI, press MenuDeselecting Inputs Useful FeaturesLocking the Operation Buttons on the Projector Description of Keylock LevelsSelecting the Transmission Speed RS-232C Changing the Password Protecting Important Settings with a PasswordSetting the Password Setting the PasswordLAN Board 10BASE-T Setting Up the Optional BoardsNetwork Function SDI BoardSetting the Stacking Mode Setting the ID NoControling Multiple Projectors with ID Numbers Projector Remote Control On-screen Display Menu Window Projector Remote Control When selecting Sharp default imageDisplaying the Break Time Operating the Network Function InternetMultiple and group projector control via computer Operating the Network FunctionStack Projection Videowall Lamp/Maintenance Indicators Maintenance IndicatorsMaintenance Indicator Condition Problem Possible Solution Confirming the Lamp Usage Time Lamp MaintenanceCondition Problem Possible Solution LampMode can be set to double the effective lamp usage Setting the Lamp ModeDescription of Lamp Mode Replacing the LampReplacing the Lamp Removing and installing the lamp unitTurn on the main power Attach the lamp cage coverUnplug the power cord Replacing the Air FilterReplacing the front air filter Troubleshooting Problem CheckFor Sharp Assistance U.S.A. only Guide to Effective Presentations Types of PresentationsCreative Presentations Guide to Effective Presentations FontsSet-Up Good BadRehearsing & Delivery Presentation TipsConnecting Pin Assignments DVI Port 29-pinPC control RS-232C Specifications and Command SettingsCommands Communication conditionsRS-232C Specifications and Command Settings Model Name Sharp remote control signal format Wired Remote Control Terminal SpecificationsSpecifications of wired remote control input Function and transmission codesComputer Compatibility Chart VGADimensions Units inches mmSpecifications PAL/PAL 60/PAL-M/PAL-N/SECAM/NTSC 3.58/NTSCGlossary Aspect ratioIndex DOT by DOTSharp Corporation

XG-V10XU specifications

The Sharp XG-V10XU is a high-performance LCD projector designed for professional environments, offering a blend of advanced features and user-friendly technologies that enhance presentations and visual experiences. With a native resolution of XGA (1024x768), the projector provides clear and precise image quality, making it suitable for both business applications and educational purposes.

One of the standout features of the XG-V10XU is its impressive brightness, boasting 2500 ANSI lumens. This allows the projector to perform well in various lighting conditions, ensuring that images and presentations remain visible even in well-lit rooms. Coupled with a high contrast ratio of 400:1, the projector delivers vibrant colors and deep blacks, enhancing overall image depth and clarity.

The XG-V10XU employs advanced image technologies, including a 3LCD system, which works to create rich and accurate color reproduction. This technology minimizes color break-up and ensures that the projector can handle a wide range of media, from detailed graphs to vivid videos, with excellent fidelity. Additionally, the projector features various image modes that allow users to adjust settings to match different content types, such as presentations, video playback, or photo exhibitions.

Versatility is another strong point of the Sharp XG-V10XU. It supports a variety of input sources, including VGA, composite video, S-Video, and HDMI, making it compatible with multiple devices such as laptops, DVD players, and gaming consoles. This flexibility is augmented by its built-in 10-watt speaker, enabling users to present audio alongside visuals without needing external sound equipment.

Portability is also a key characteristic of the XG-V10XU. Weighing in at around 2.8 kg, it is designed for ease of transport, making it an excellent choice for traveling professionals or educators who need to move between locations. The projector’s compact dimensions do not compromise build quality, as Sharp incorporates durable materials to ensure longevity under regular use.

Additionally, the Sharp XG-V10XU includes features such as a digital keystone correction to adjust image distortions, facilitating quick setup in varied environments. With a lengthy lamp life of approximately 4000 hours, maintenance is minimized, allowing users to focus on their presentations rather than equipment downtime. Overall, the Sharp XG-V10XU stands out as a reliable and effective solution for those in need of a quality projector that combines ease of use with exceptional performance.