Sharp XG-V10XU Power ON/OFF, Turning on the Main Power, Press Power on, Press Power OFF

Page 20

Power ON/OFF

Connections&

Setup

TEMP LAMP2 LAMP1 POWER

21

Turning on the Main Power

Press the MAIN POWER switch on the side of the projector. The POWER indicator lights up red and the projector enters standby mode.

When the main power is not on, the remote control cannot be used to operate the projector.

POWER buttons

Press POWER ON.

• The flashing green LAMP REPLACEMENT indicator

shows that the lamp is warming up. Wait until the

indicator stops flashing before operating the projector.

• If the power is turned off and then immediately turned

on again, it may take a short while before the lamp

turns on.

• After the projector is unpacked and turned on for the first

TEMP LAMP2 LAMP1 POWER

21

1.2.34.5.6

Conference Series

time, a slight odor may be emitted from the exhaust vent.

This odor will soon disappear with use.

When the power is on, the LAMP REPLACEMENT indicator lights, indicating the status of the lamp. Green: Lamp is ready.

Flashing green: Warming up.

Red: Change the lamp.

When setting the lamp mode to “Lamp 1 only” or “Lamp 2 only”, only the LAMP REPLACEMENT indicator corresponding to the lamp set is lit.

Press POWER OFF.

Press POWER OFF again while the message is displayed.

If you accidentally pressed POWER OFF and do not want to turn off the power, wait until the power off screen disappears.

When POWER OFF is pressed twice, the POWER indicator will light up red and the cooling fan will run for about 90 seconds. The projector will then enter standby mode.

Wait until the cooling fan stops before disconnecting the power cord.

The power can be turned on again by pressing POWER ON. When the power is turned on, the POWER indicator and the LAMP REPLACEMENT indicators light green.

The POWER indicator flashes if the front filter is not securely installed.

E-19

Image 20
Contents XG-V10XU Introduction EnglishCleaning AccessoriesPower Sources Power-Cord ProtectionImportant Safeguards Temperature Monitor Function Using the Carrying HandleUsing the Terminal Cover Lamp Monitor FunctionOutstanding Features High-end LCD Projector with Ultra High BrightnessNetwork Capability Contents Maintenance For other operating systems For other languages To Install Acrobat Reader from the CD-ROMFor Windows For Macintosh Part Names ProjectorPart Names Inserting the batteries Remote ControlBattery Cover Compartment Supplied Accessories RRMCG1564CESAPower Supply Connecting the Power CordConnecting the Projector to a Computer ConnectionsPlug and Play function when connecting to a 15-pin terminal Projecting Computer ImagesConnecting to a computer using the RS-232CPort ComputerWatching Video Images and Laser Disc Images Laser disc playerConnecting to an amplifier and other audio components Watching DVD and Digital TV ImagesFor Better Sound AmplifierPower ON/OFF Turning on the Main PowerPress Power on Press Power OFFSetting Up the Screen Using the Adjustment FeetUsing the Adjustment Feet DownAdjusting the Projection Distance Standard Setup Front ProjectionThrow Distance Computer and Video InputAdjusting the Projection Distance Throw distance ratio 1.9 toComputer and Video InputAN-LV18MX Throw distance ratio 0.9AN-LV26EZ Throw distance ratio 1.2 to 1.4AN-LV36EZ Throw distance ratio 1.7 to 2.7AN-LV55EZ Throw distance ratio 2.6 to 3.7AN-LV80EZ Throw distance ratio 3.8 to 5.3Upper and Lower Lens Shift Position Upper and Lower Lens Shift Position Ceiling MountDigital Shift Digital Image AdjustmentsLens Button Projection Using a Mirror Image ProjectionRear Projection Ceiling-mount ProjectionUsing the Operation Buttons Selecting the Input Signal SourceAdjusting the Volume Projector Remote ControlProjected Image Superimposing a Black ScreenDisplaying a Still Image On-screen Display Remote Control When Input 1.2.3 or Input 4.5.6 is pressedMagnifying a Specific Portion of an Image ProjectorAdjusting the Picture Aspect Ratio ComputerGamma Modes Projector On-screen Display Remote ControlGamma Correction Function Selecting the Remote Control Mode Operating the Remote ControlUsing the Remote Control as a Wireless Mouse Remote Control/Mouse Receiver PositioningMouse mode buttons Use as a Wireless MouseOperating the Remote Control Connecting the Mouse Receiver Connecting the Remote Mouse ReceiverConnecting to the USB port on a PC or Macintosh Connecting to the PS/2 port on a PCUsing as a Laser Pointer Using as a Wired Remote ControlWired Remote Control Use as a Laser PointerUsing the GUI Graphical User Interface Menu Screen Input 1, 2 RGB or 3 Digital mode Input 4, 5 Video modeBasic Operations GUI On-screen DisplayItems on the Input 1, 2 or 3 Mode Menu Bar Menu BarsMain menu Sub menuItems on the Input 4 or 5 Mode Menu Bar Menu BarsGUI On-screen Display RGB input in Input 1 or 2 mode Adjusting the PictureDescription of Adjustment Items Adjusting the Color Temperature Adjusting the PictureDescription of Color Temperature Projector Remote Control GUI On-screen DisplayProgressive Mode Selecting the Signal TypeGUI On-screen Display Projector Remote Control Adjusting the Computer Images RGB menu only Saving and Selecting Adjustment Settings Adjusting the Computer Images RGB menu onlySaving the adjustment setting Selecting a saved settingSpecial Mode Adjustment Checking the Input SignalOn-screen Display GUI On-screen Display When Auto Sync is set to onAuto Sync Display Function Adjusting the Sound Displaying Dual Pictures RGB menu only Reducing Image Noise Video menu only Description of OSD Display Setting the Video Signal Video menu onlyTurning On/Off the On-screen Display Selecting a Background Image Selecting a Startup ImageDescription of Background Images Description of Startup ImagesSelecting the Economy Mode Automatic Power Shutoff FunctionDescription of Automatic Power Shutoff Monitor Out/RS-232C Off FunctionSelecting the Economy Mode Reversing/Inverting Projected ImagesID No. Display Off Function Description of ID No. DisplaySelecting the On-screen Display Language Displaying the Adjustment Settings To exit from the GUI, press MenuUseful Features Locking the Operation Buttons on the ProjectorDeselecting Inputs Description of Keylock LevelsSelecting the Transmission Speed RS-232C Protecting Important Settings with a Password Setting the PasswordChanging the Password Setting the PasswordSetting Up the Optional Boards Network FunctionLAN Board 10BASE-T SDI BoardControling Multiple Projectors with ID Numbers Setting the Stacking ModeSetting the ID No Displaying the Break Time Projector Remote Control On-screen Display Menu WindowProjector Remote Control When selecting Sharp default image Operating the Network Function InternetMultiple and group projector control via computer Operating the Network FunctionStack Projection Videowall Maintenance Indicator Condition Problem Possible Solution Lamp/Maintenance IndicatorsMaintenance Indicators Lamp Maintenance Condition Problem Possible SolutionConfirming the Lamp Usage Time LampSetting the Lamp Mode Description of Lamp ModeMode can be set to double the effective lamp usage Replacing the LampRemoving and installing the lamp unit Turn on the main powerReplacing the Lamp Attach the lamp cage coverReplacing the front air filter Unplug the power cordReplacing the Air Filter For Sharp Assistance U.S.A. only TroubleshootingProblem Check Creative Presentations Guide to Effective PresentationsTypes of Presentations Guide to Effective Presentations FontsSet-Up Good BadRehearsing & Delivery Presentation TipsConnecting Pin Assignments DVI Port 29-pinRS-232C Specifications and Command Settings CommandsPC control Communication conditionsRS-232C Specifications and Command Settings Model Name Wired Remote Control Terminal Specifications Specifications of wired remote control inputSharp remote control signal format Function and transmission codesComputer Compatibility Chart VGADimensions Units inches mmSpecifications PAL/PAL 60/PAL-M/PAL-N/SECAM/NTSC 3.58/NTSCGlossary Aspect ratioIndex DOT by DOTSharp Corporation

XG-V10XU specifications

The Sharp XG-V10XU is a high-performance LCD projector designed for professional environments, offering a blend of advanced features and user-friendly technologies that enhance presentations and visual experiences. With a native resolution of XGA (1024x768), the projector provides clear and precise image quality, making it suitable for both business applications and educational purposes.

One of the standout features of the XG-V10XU is its impressive brightness, boasting 2500 ANSI lumens. This allows the projector to perform well in various lighting conditions, ensuring that images and presentations remain visible even in well-lit rooms. Coupled with a high contrast ratio of 400:1, the projector delivers vibrant colors and deep blacks, enhancing overall image depth and clarity.

The XG-V10XU employs advanced image technologies, including a 3LCD system, which works to create rich and accurate color reproduction. This technology minimizes color break-up and ensures that the projector can handle a wide range of media, from detailed graphs to vivid videos, with excellent fidelity. Additionally, the projector features various image modes that allow users to adjust settings to match different content types, such as presentations, video playback, or photo exhibitions.

Versatility is another strong point of the Sharp XG-V10XU. It supports a variety of input sources, including VGA, composite video, S-Video, and HDMI, making it compatible with multiple devices such as laptops, DVD players, and gaming consoles. This flexibility is augmented by its built-in 10-watt speaker, enabling users to present audio alongside visuals without needing external sound equipment.

Portability is also a key characteristic of the XG-V10XU. Weighing in at around 2.8 kg, it is designed for ease of transport, making it an excellent choice for traveling professionals or educators who need to move between locations. The projector’s compact dimensions do not compromise build quality, as Sharp incorporates durable materials to ensure longevity under regular use.

Additionally, the Sharp XG-V10XU includes features such as a digital keystone correction to adjust image distortions, facilitating quick setup in varied environments. With a lengthy lamp life of approximately 4000 hours, maintenance is minimized, allowing users to focus on their presentations rather than equipment downtime. Overall, the Sharp XG-V10XU stands out as a reliable and effective solution for those in need of a quality projector that combines ease of use with exceptional performance.