Sharp XG-V10XU Controling Multiple Projectors with ID Numbers, Setting the Stacking Mode

Page 64

Controling Multiple Projectors with ID Numbers

Projector

Remote Control

1, 6 2, 3, 4

5

1.2.3 4.5.6

(GUI) On-screen Display

This projector can form a network of up to 250 projectors. To identify separately and control specified projector, you need to set ID No..

The ID No. you set is displayed on the LED.

(Slide the MOUSE/ADJUSTMENT switch

MOUSE ADJ.

on the remote control to the ADJ. position.)

 

Setting the ID No.

1Press MENU.

2Press ß/© to select “Options (2)”.

3Press ∂/ƒ to select “Set ID No.”. (The ID No. is factory preset to “001”.)

4Press © to select the first digit and ∂/ƒ to select the desired number. Continue this procedure for the remaining two digits.

5Press ENTER to save the setting.

6To exit from the GUI, press MENU.

•When ID NO. is not be displayed, refer to the setting of “ID No. Display”. See page 56 for setting “Display Off” function.

•The ID No. can be set from 001 to 250.

•For details on intended purpose, see pages 65 to 68.

Setting the Stacking Mode

&FeaturesFunction

UsefulNetwork

E-63

Projector

Remote Control

1, 6 2, 3, 4

5

1.2.3 4.5.6

(GUI) On-screen Display

You can double the brightness of an image by stacking two projectors and projecting same picture simultaneously. To control two projectors, assign one as the master and one as the slave. The slave projector will duplicate any operational settings made to the master projector.

(Slide the MOUSE/ADJUSTMENT switch MOUSE ADJ. on the remote control to the ADJ. position.)

1Press MENU.

2Press ß/© to select “Options (2)”.

3Press ∂/ƒ to select “Stack Setting”, and then press ©.

4Press ∂/ƒ to select “Normal”, “Master” or “Slave”.

5Press ENTER to save the setting.

6To exit from the GUI, press MENU.

•When the projector is set to “Master”, button operation signals will be transmitted through RS-232C.

•When the projector is set to “Slave”, operations follow the button operations sent from the “Master”.

•If you set slave, only ∂/ƒ/ß/©, ENTER, UNDO, Power ON, Power OFF, LENS and MENU can be used. Other buttons cannot be used and are controlled by the master projector or computer through the RS-232C connection.

•For details on intended purpose, see pages 67 and 68.

Page 63 Page 65
Image 64
Page 63 Page 65
Contents XG-V10XU Introduction EnglishCleaning AccessoriesPower Sources Power-Cord ProtectionImportant Safeguards Temperature Monitor Function Using the Carrying HandleUsing the Terminal Cover Lamp Monitor FunctionOutstanding Features High-end LCD Projector with Ultra High BrightnessNetwork Capability Contents Maintenance For Windows For Macintosh To Install Acrobat Reader from the CD-ROMFor other operating systems For other languages Part Names ProjectorPart Names Battery Cover Compartment Remote ControlInserting the batteries Supplied Accessories RRMCG1564CESAPower Supply Connecting the Power CordConnecting the Projector to a Computer ConnectionsPlug and Play function when connecting to a 15-pin terminal Projecting Computer ImagesConnecting to a computer using the RS-232CPort ComputerWatching Video Images and Laser Disc Images Laser disc playerConnecting to an amplifier and other audio components Watching DVD and Digital TV ImagesFor Better Sound AmplifierPower ON/OFF Turning on the Main PowerPress Power on Press Power OFFSetting Up the Screen Using the Adjustment FeetUsing the Adjustment Feet DownAdjusting the Projection Distance Standard Setup Front ProjectionThrow Distance Computer and Video InputAdjusting the Projection Distance Throw distance ratio 1.9 toComputer and Video InputAN-LV18MX Throw distance ratio 0.9AN-LV26EZ Throw distance ratio 1.2 to 1.4AN-LV36EZ Throw distance ratio 1.7 to 2.7AN-LV55EZ Throw distance ratio 2.6 to 3.7AN-LV80EZ Throw distance ratio 3.8 to 5.3Upper and Lower Lens Shift Position Upper and Lower Lens Shift Position Ceiling MountLens Button Digital Image AdjustmentsDigital Shift Projection Using a Mirror Image ProjectionRear Projection Ceiling-mount ProjectionUsing the Operation Buttons Selecting the Input Signal SourceAdjusting the Volume Projector Remote ControlDisplaying a Still Image Superimposing a Black ScreenProjected Image On-screen Display Remote Control When Input 1.2.3 or Input 4.5.6 is pressedMagnifying a Specific Portion of an Image ProjectorAdjusting the Picture Aspect Ratio ComputerGamma Correction Function Projector On-screen Display Remote ControlGamma Modes Selecting the Remote Control Mode Operating the Remote ControlUsing the Remote Control as a Wireless Mouse Remote Control/Mouse Receiver PositioningOperating the Remote Control Use as a Wireless MouseMouse mode buttons Connecting the Mouse Receiver Connecting the Remote Mouse ReceiverConnecting to the USB port on a PC or Macintosh Connecting to the PS/2 port on a PCUsing as a Laser Pointer Using as a Wired Remote ControlWired Remote Control Use as a Laser PointerUsing the GUI Graphical User Interface Menu Screen Input 1, 2 RGB or 3 Digital mode Input 4, 5 Video modeBasic Operations GUI On-screen DisplayItems on the Input 1, 2 or 3 Mode Menu Bar Menu BarsMain menu Sub menuItems on the Input 4 or 5 Mode Menu Bar Menu BarsDescription of Adjustment Items Adjusting the PictureGUI On-screen Display RGB input in Input 1 or 2 mode Adjusting the Color Temperature Adjusting the PictureDescription of Color Temperature Projector Remote Control GUI On-screen DisplayGUI On-screen Display Projector Remote Control Selecting the Signal TypeProgressive Mode Adjusting the Computer Images RGB menu only Saving and Selecting Adjustment Settings Adjusting the Computer Images RGB menu onlySaving the adjustment setting Selecting a saved settingSpecial Mode Adjustment Checking the Input SignalAuto Sync Display Function When Auto Sync is set to onOn-screen Display GUI On-screen Display Adjusting the Sound Displaying Dual Pictures RGB menu only Reducing Image Noise Video menu only Turning On/Off the On-screen Display Setting the Video Signal Video menu onlyDescription of OSD Display Selecting a Background Image Selecting a Startup ImageDescription of Background Images Description of Startup ImagesSelecting the Economy Mode Automatic Power Shutoff FunctionDescription of Automatic Power Shutoff Monitor Out/RS-232C Off FunctionSelecting the Economy Mode Reversing/Inverting Projected ImagesID No. Display Off Function Description of ID No. DisplaySelecting the On-screen Display Language Displaying the Adjustment Settings To exit from the GUI, press MenuUseful Features Locking the Operation Buttons on the ProjectorDeselecting Inputs Description of Keylock LevelsSelecting the Transmission Speed RS-232C Protecting Important Settings with a Password Setting the PasswordChanging the Password Setting the PasswordSetting Up the Optional Boards Network FunctionLAN Board 10BASE-T SDI BoardSetting the ID No Setting the Stacking ModeControling Multiple Projectors with ID Numbers Projector Remote Control When selecting Sharp default image Projector Remote Control On-screen Display Menu WindowDisplaying the Break Time Operating the Network Function InternetMultiple and group projector control via computer Operating the Network FunctionStack Projection Videowall Maintenance Indicators Lamp/Maintenance IndicatorsMaintenance Indicator Condition Problem Possible Solution Lamp Maintenance Condition Problem Possible SolutionConfirming the Lamp Usage Time LampSetting the Lamp Mode Description of Lamp ModeMode can be set to double the effective lamp usage Replacing the LampRemoving and installing the lamp unit Turn on the main powerReplacing the Lamp Attach the lamp cage coverReplacing the Air Filter Unplug the power cordReplacing the front air filter Problem Check TroubleshootingFor Sharp Assistance U.S.A. only Types of Presentations Guide to Effective PresentationsCreative Presentations Guide to Effective Presentations FontsSet-Up Good BadRehearsing & Delivery Presentation TipsConnecting Pin Assignments DVI Port 29-pinRS-232C Specifications and Command Settings CommandsPC control Communication conditionsRS-232C Specifications and Command Settings Model Name Wired Remote Control Terminal Specifications Specifications of wired remote control inputSharp remote control signal format Function and transmission codesComputer Compatibility Chart VGADimensions Units inches mmSpecifications PAL/PAL 60/PAL-M/PAL-N/SECAM/NTSC 3.58/NTSCGlossary Aspect ratioIndex DOT by DOTSharp Corporation

XG-V10XU specifications

The Sharp XG-V10XU is a high-performance LCD projector designed for professional environments, offering a blend of advanced features and user-friendly technologies that enhance presentations and visual experiences. With a native resolution of XGA (1024x768), the projector provides clear and precise image quality, making it suitable for both business applications and educational purposes.

One of the standout features of the XG-V10XU is its impressive brightness, boasting 2500 ANSI lumens. This allows the projector to perform well in various lighting conditions, ensuring that images and presentations remain visible even in well-lit rooms. Coupled with a high contrast ratio of 400:1, the projector delivers vibrant colors and deep blacks, enhancing overall image depth and clarity.

The XG-V10XU employs advanced image technologies, including a 3LCD system, which works to create rich and accurate color reproduction. This technology minimizes color break-up and ensures that the projector can handle a wide range of media, from detailed graphs to vivid videos, with excellent fidelity. Additionally, the projector features various image modes that allow users to adjust settings to match different content types, such as presentations, video playback, or photo exhibitions.

Versatility is another strong point of the Sharp XG-V10XU. It supports a variety of input sources, including VGA, composite video, S-Video, and HDMI, making it compatible with multiple devices such as laptops, DVD players, and gaming consoles. This flexibility is augmented by its built-in 10-watt speaker, enabling users to present audio alongside visuals without needing external sound equipment.

Portability is also a key characteristic of the XG-V10XU. Weighing in at around 2.8 kg, it is designed for ease of transport, making it an excellent choice for traveling professionals or educators who need to move between locations. The projector’s compact dimensions do not compromise build quality, as Sharp incorporates durable materials to ensure longevity under regular use.

Additionally, the Sharp XG-V10XU includes features such as a digital keystone correction to adjust image distortions, facilitating quick setup in varied environments. With a lengthy lamp life of approximately 4000 hours, maintenance is minimized, allowing users to focus on their presentations rather than equipment downtime. Overall, the Sharp XG-V10XU stands out as a reliable and effective solution for those in need of a quality projector that combines ease of use with exceptional performance.
Top Page Image Contents