TANDBERG Hub Connecting cables, Power cable, Isdn PRI or BRI cables, LAN cable, RS 232 cable

Page 14

TANDBERG 3G Gateway User Manual

2.2 Connecting cables

Power cable

Connect the system power cable to an electrical distribution socket.

ISDN PRI or BRI cables

The E1/T1 cable should be connected to a CSU (Channel Service Unit). You will need a CSU between your 3G Gateway and the PRI line from your network provider.

LAN cable

To use the 3G Gateway on IP, connect a LAN cable from the ‘LAN 1’ connector on the 3G Gateway to your network. The LAN 2, 3 and 4’ connector is not used and should be left open.

RS 232 cable

To control the 3G Gateway using the data port, connect an RS 232 cable between the 3G Gateway’s RS 232 connector and the COM-port on a PC. For further information, please refer to the paragraph ‘2.3’ and the Data Port Command Interface User Guide.

14

Image 14

Contents Tandberg 3G GatewayTrademarks and copyright DisclaimerIii Environmental Issues TANDBERG’s Environmental PolicyOperator Safety Summary Contact us Table of Contents Introduction Network and Features Rear view Tandberg 3G GatewayFront view 1 3G Gateway Capacity typical scenarios Installation PrecautionsInstallation site preparations UnpackingIsdn PRI or BRI cables Connecting cablesPower cable LAN cable3G Gateway Configuration Accessing the 3G Gateway 3G Gateway start-upPage Idle No call is active Active Call Call is active Using the 3G Gateway Call OverviewGW Calls Status Idle No active call, call has been disconnectedDuration IP/H.323Dial from Umts DidConnecting Sequence of ServicesServices Dial from IPPage PRI Status View System StatusIsdn PRI/BRI Status BRI Status Page IP Address Shows the IP address of the 3G Gateway 2 H.323 StatusSystem Information Available Resources PRI Configuration Configure the 3G GatewayIsdn PRI/BRI Configuration PRI ProtocolLow Channel BRI configurationBearer capabilities BRI ProtocolBearer capabilities Trunks SS7 ConfigurationGeneral Link setsRestart Example1Example2 Page Page Address IP ConfigurationIP Address Assignment Subnet Mask10Half Date and Time SettingsEthernet Speed Auto 10FullH.323 Configuration Gatekeeper IP AddressAuthentication Mode Authentication ID, PasswordSIP Configuration Video Portal Systems Video Portal ConfigurationVideo Portal Settings Snmp Community name Snmp ConfigurationSnmp Mode System contactSystem location Snmp Trap Host 1, 2Password Miscellaneous ConfigurationConfiguration Services Phonebook settingsExternal Manager settings Software Upgrade Page Page Description Services ConfigurationService type Net type from10.1 IVR Example 1 Number-plan mapping ExamplesBackspace Example4 H323 to SIP Example 2 HotlineExample3 SIP to H323 Appendices Appendix 1 Declaration of Conformity Appendix 3 using the front panel LCD keys State 1 menu navigation, Display current menu itemState 7 Choose Configuration option Technical Specifications Index Tandberg Gateway Index Snmp