TANDBERG 3G Gateway User Manual
2.3 3G Gateway Configuration
The 3G Gateway requires some basic configurations before it can be used. It will be necessary to find the
It is possible to use the front panel LCD display or the serial RS232 cable. Using the RS232 cable follow the instructions below:
1.Connect the RS232 cable between the 3G Gateway and a PC and then switch on the 3G Gateway.
2.Start a terminal program on the PC and configure it to: 115200, 8, 1, None.
3.a. To assign a static
b.To assign an IP Subnetmask, type ‘Xconf ip address subnetmask <subnetmask>’.
c.To assign an IP Gateway address, type ‘Xconf ip address gateway <gateway IP- address>’.
4.Restart the 3G Gateway.
5.Start a WEB browser and enter the
6.To configure the 3G Gateway for UMTS dial in, enter PRI or BRI numbers and dial in number(s). For details, see the ‘PRI Configuration’ and the ‘Services Configuration’ section.
7.To configure the gateway for IP dial in, register the gateway to a gatekeeper and enter H.323 services. For details, see chapter 5.10, Services Configuration..
The LCD panel makes it possible to configure and the Check the IP settings and to reboot the system. The front panel LCD menu items are displayed below. Due to the limited amount of buttons the function will differ on every menu level also depending on the function of the menu (reading or editing). Appendix 6.2 contains a detailed description of every level and functions of every button. The usage of the buttons is designed in an intuitive way and should not result in any problems.
MainMenu
IP settings
IP Information
Commands
IP Settings
IP Address
IP Netmask
IP Default GW
Commands
Reboot
IP Information
IP Address
To configure the IP number, follow the instructions below:
1.Press any key to get the main menu.
2.IP settings should be displayed.
3.Press [ENTER] to access the IP settings menu.
4.Us the [UP/DOWN] key to select IP Address.
5.Press [ENTER] to access the IP address editing menu.
15