TANDBERG 3G Gateway User Manual
6.2Appendix 3: using the front panel LCD keys
Every button on the front panel has multiple functions due to the limited amount of keys. In this appendix it is explained what the different functions are at different levels.
State 0: Display Status info
Any Key: State 1
State 1: menu navigation, Display current menu item
•Up/Down: navigate between different
•ESC Up in the menu structure, State 1; from lowest level to State 0
•ENTER for menu items: deeper into the menu structure, State 1
•ENTER for data items: State 2
•ENTER for selectable data items: State 7
•ENTER for command items (reboot..): State 6
State 2: Show Data Element (1e line Data Element description, 2e line Data Element value)
•Up/Down: Scrolling in the content if wider then 1 display width, State 2
•ESC: State 1
•ENTER for textual data items: State 3
•ENTER for selectable data items: State 7
State 3: Navigate within textual data element
•Up/Down: Cursor (non blinking) place on correct location in the data element, if necessary scroll. Positions with an alphabet of only 1 character (e.g. the full stop "." in an IP address) is skipped), State 3
•Enter: State 4
•ESC: With changes in the data: State 5 Confirm
•ESC: Without changes in the data: State 2
State 4: Edit textual data element, Cursor blinking on the character position to be changed
•Up/Down: Change character cyclic within the alphabet for that position, State 4
•ENTER: Next position (as State 3 [UP]), State 4
•ESC: State 3
State 5: "Confirm" Menu with 2 Items that can be scrolled using UP/DOWN (like State 1), "Yes"/"No", "No" is de default.
•Up/Down: browse Yes/No
56