Runco VX-2i manual Quick Setup, Step Procedure For Details, Refer to

Page 22

Installation

3.2

Quick Setup

Table 3-1gives a quick overview of the VX-2i installation process. The sections following this one provide detailed instructions.

	Note		Installation should be performed by a qualified custom video
	Note		installation specialist.
Table 3-1. Installation Overview

Step			Procedure	For Details, Refer to
Step			Procedure	page...
				page...

1		Choose a location for the projector		13

2		Connect signal sources to the projector		20

3		Connect external controller to RS-232 port (optional)		24

4		Connect other home theater components to 12-volt trigger		24
		outputs (optional)

5		Apply power to the projector		24, 25

6		For rear-screen and/or ceiling-mount installations, select		25
		the proper picture orientation

7		Lens adjustments: projected image size (zoom), position		17, 26
		(shift) and focus

8		Projector calibration: adjust the following for each input,		28 through 34
		starting with Component SD; save settings when finished:
		• Aspect ratio
		• Brightness
		• Contrast
		• Color level
		• Tint
		• Input position

12	Runco VX-2i Owner’s Operating Manual

Image 22

Contents VX-2i Page TWO Year Limited Warranty For Projectors, Video Processors and ControllersEffective Warranty Date Runco INTERNATIONAL, INC Safety Precautions Table of Contents Operation Maintenance and TroubleshootingSpecifications Serial CommunicationsList of Figures List of Figures Introduction About This ManualUsing This Manual If you need Turn toDescription, Features and Benefits Key Features and BenefitsOptional Accessories Controls and Functions VX-2i at a GlanceComponent Video RCA connectors HD1 / HD2 Analog BNC connectorsVolt 800 mA Trigger Outputs Video 1 / S-VIDEOVX-2i Remote Control Power Input 100 to 240 VAC Connect the VX-2i to power hereVideo On / OFFCursor Keys Comp ComponentLetbox Letterbox Aspect Ratio Selection ButtonsANA Anamorphic 3 For 169 DVDs 4X3 Standard 43 Wide VirtualWideInstallation Remote ControlQuick Setup Step Procedure For Details, Refer toInstallation Considerations Installation TypeFlat vs. Curved Screens Other Considerations Ambient LightThrow Distance Throw Ratio Throw Distance Range Lens Option Note Throw Dist Screen Width Minimum MaximumPosition Vertical and HorizontalLens Shift Vertical Lens Shift Mounting Adjusting the ProjectionAngle Folded OpticsConnections to Connector Panel AccessConnecting the VX-2i to VX-2iDigital DTV RGB Connections See Figure Digital DTV RGB ConnectionsAnalog Computer RGB Connections See Figure Analog RGB ConnectionsComposite/S-Video/Component Video Connections See Figure 10. Composite, S-Video and Component Video ConnectionsConnection Connecting 12-VoltRS-232 Controller Trigger Outputs toAdjusting the Picture Orientation Turning on the PowerOperation Using the On-Screen Menus Lens AdjustmentsFocus Zoom Shift Input Source ISF PresetsService Aspect RatioAspect Ratio Main MenuInput Source Input Source Composite Video Component SDAspect Ratio Settings Remote Aspect Ratio Control Description KeyPicture Picture Brightness Contrast Color Tint SharpnessTypical Gray Bar Pattern for Adjusting Contrast Gray Yellow Cyan Green Magenta Red Blue Input Position Input Position Left/Right Up/Down Width Height OverscanCalibration ISF PresetsInformation Should be used by ISF-certified technicians onlyOperation Service Tip Operation Lamp Replacement Troubleshooting Tips Maintenance and TroubleshootingSymptom Possible Causes Solution Maintenance and Troubleshooting Command Parameter Value Description Min/max Stored? RS-232 Connection and Port ConfigurationSerial Command Syntax Serial CommunicationsSerial Communications Night YES SHARPNESS? Specifications VX-2i SpecificationsPower Requirements Home Theater Calibration SpecificationsIndustry-Standard Specifications DimensionsLimited Warranty Specifications are subject to change without noticeVX-2i Dimensions VX-2i DimensionsPage Runco CL-810 Owner’s Operating Manual