Runco Vivix Pixel for Pixel, PFP-7, PFP-11 manual Fixed Pixel Displays

Fixed Pixel Displays

A fixed pixel display can be one of several types of displays, including Plasma (flat panel) displays, DLP™ projectors, LCD projectors and D-ILA projectors. Selecting a scan rate for these types of displays is actually quite easy since the display has a fixed resolution, commonly known as the display's native resolution.

To determine which scan rate output to use, first determine your display's native resolution.

For example, if you have a DLP™ or an LCD projector with a native resolution of 1024 x 768, set the SCAN RATE for 1024 x 768.

Runco recommends that for fixed-pixel displays the output scan rate ALWAYS be set to match the native resolution of the display for best results. Selecting a resolution output higher or lower than that of the native resolution of the display will cause the display to scale the image, resulting is decreased resolution and performance.

If you have a fixed-pixel display and its native resolution does not match any of the resolution outputs of the PFP-7/PFP-11, try different resolutions to see which one gives you the best picture quality.

20