Runco PFP-7, Vivix Pixel for Pixel, PFP-11 manual Store YES

COMMAND	PARAMETER (min/max)	Value stored?	DESCRIPTION
SR800X600	NA	YES	Selects the 800 x 600 scan rate
SR854x480	NA	YES	Selects the 854 x 480 scan rate
SR1024X768	NA	YES	Selects the 1024 x 768 scan rate
SR1024x1024	NA	YES	Selects the 1024 x 1024
			scan rate
SR1280x720	NA	YES	Selects the 1280 x 720 scan rate
SR1280X768	NA	YES	Selects the 1280 x 768 scan rate
SR1280X1024	NA	YES	Selects the 1280 x 1024
			scan rate (PFP-11 only)
SR1366x768	NA	YES	Selects the 1366 x 768
			scan rate (PFP-11 only)
SR1366x1024	NA	YES	Selects the 1366 x 1024
			scan rate (PFP-11 only)
SR480P	NA	YES	Selects the 480p scan rate
SR540P	NA	YES	Selects the 540p scan rate
SR600P	NA	YES	Selects the 600p scan rate
SR720P	NA	YES	Selects the 720p scan rate
!STORE	NA	YES	Stores the current set of values
			(all values) into non-volatile
			memory
!RESTORE	NA	YES	Restores the stored values
!FACTORY	NA	YES	Restores all values to factory
			default levels
!STATUS	NA	NA	Asks the 4404 to provide the
			hardware information, current
			values and system status to the
			automation system
!RESTART	NA	NO	Restarts the 4404
			(same as turning it on and off)
!ECHO	NA	NO	Enables the 4404 to echo back
			commands and values to the
			automation system
!NOECHO	NA	NO	Disables the 4404's character
			echoing
!INSTALLMODEOFF	NA	NA	Disables the Installation menu
			(removes it from the main menu)
!INSTALLMODEON	NA	NA	Enables the Installation menu
			(enables it on the main menu)
!MODEL	NA	NA	Makes the front panel display
			the model number
!PANELTEST	NA	NA	Makes the front panel display a
			test sentence

30