Runco CL-510LT manual Remote Control, Off

Page 10

Runco CL-510/ CL-510LT User’s Manual

❚Remote Control

Anamorphic

For 16: 9 DVDs.

4 X 3

The input signal will be scaled to fit 4: 3 display mode in the center of screen.

LPos+, LPos-

Letterbox position

Letterbox

Letterbox mode. Image in letter- box format is enlarged to fit 16:9 full screen display and the upper/ lower portion are “blanked off”.

VirtualWide

4:3 image is enlarged nonlinearly in horizontal direction to fit 16: 9 full screen display.

ON

Hold down this button for ONE second to turn on the unit.

OFF

Press this button to turn off the unit.

M1, M2, M3, Default

Recall video memory sequentially (see "Selecting Video Memory" on page 18)

Color

Adjust color intensity

Brightness

Adjust picture brightness

Contrast

Adjust picture contrast

Tint

Adjust color tones

1. Overview 7

Image 10

Contents CL-510 / CL-510LT Effective Warranty Date What is Covered Under the Terms of this WarrantyWhat is not Covered Under the Terms of this Warranty RIGHTS, Limits and ExclusionsTo Obtain SERVICE, Contact Your Runco Dealer Important Warranty RegistrationAdditional Information Runco CL-510/ CL-510LT Video Projector User’s Manual Table of Contents Features OverviewFront / Upper Side Projector Exterior ViewRear / Bottom Side Lamp LED Controls and FunctionsControl Panel Zoom RingConnector Panel DVI/ HdcpRemote Control OFFPIP ActivePIP+ RGB HDConnect the Power Cord InstallationRemote Control ProjectorAdjust the Lens Zoom/Focus ring Adjust the heightThrow Distance Installation For CL-510 With 1.75 2.00 LensScreen H x W Vertical OffsetThrow Distance Chart For CL-510 With 1.75 2.00 Lens Screen Hight Screen Width Min TD Max TD Vertical OffsetInstallation For CL-510LT With 2.30 3.00 Lens Throw Distance Chart For CL-510LT With 2.30 3.00 Lens Connecting Video Inputs ConnectingVideo / S-Video / Component Interlaced Video Progressive Component DTV Y/PB/PR Rgbhv DTV RGBConnecting a Computer DVI/ Hdcp Basic Operation Turning on the PowerZoom/ Focusing Selecting Video MemorySetting Menu Direct Picture Adjust Menu BypassSelecting Aspect Ratio Selecting Input Source PIP/ PBP functionTurning off the Power Menu Using the MenuMain Menu Aspect Ratio Picture Quality AdjustmentsScreens Options Setup White Balance To adjust grey scale Additional Information Replace the Lamp Contact your Runco DealerTroubleshooting Problem Possible Cause RemedySpecifications CL-510/ CL-510LT SpecificationsCsms Home Theater Calibration Ansi Lumen Specification Ansi Lumen specificationCsms Home Theater Calibration foot-Lambert fL Specification Dimensions RS-232 Setup RS-232C Control Codes PC Out AdapterRUMA-010300 rev