Runco CL-510LT manual Selecting Aspect Ratio, Direct Picture Adjust Menu Bypass, Setting Menu

Page 22

Runco CL-510/ CL-510LT User’s Manual

Selecting "ASPECT RATIO"

■Select the proper aspect ratio according to the content being used. There are four aspect ratios:

■ Anamorphic: 4:3 image is stretched horizontally to fit a 16: 9 screen. This is for 16:9 DVDs.

■4 X 3: The input signal will be scaled to fit 4 : 3

display mode in the center screen.

■Letterbox: Image in letterbox format is enlarged to fit 16:9 full screen display and the upper/lower portion are cropped.

■VirtualWide: This transforms a 4x3 image to a 16x9 image.

■LPos+, LPos-: Adjust Letterbox image vertical position.

Direct Picture Adjust (Menu Bypass)

■Press Color to adjust color intensity.

■ Press Brightness to adjust picture brightness.

■ Press Contrast to adjust picture contrast.

■Press Tint to adjust color tones.

Setting Menu

■Press the Menu button to turn on /off the on-screen menu.

■Use the ARROW buttons (c,e,d,f) to select the menu or to make various adjustments.

■Press the Enter or f button to enter the setting of items in the menu, or press the Exit button to leave and save the setting of items in the menu.

■ For more detailed settings, see Chapter 5 Menu on page 22.

■Press Picture to access the picture setting menu.

■Press Info to access projector information.

4. Basic Operation 19

Image 22

Contents CL-510 / CL-510LT Effective Warranty Date What is Covered Under the Terms of this WarrantyWhat is not Covered Under the Terms of this Warranty RIGHTS, Limits and ExclusionsTo Obtain SERVICE, Contact Your Runco Dealer Important Warranty RegistrationAdditional Information Runco CL-510/ CL-510LT Video Projector User’s Manual Table of Contents Features OverviewFront / Upper Side Projector Exterior ViewRear / Bottom Side Lamp LED Controls and FunctionsControl Panel Zoom RingConnector Panel DVI/ HdcpRemote Control OFFPIP ActivePIP+ RGB HDConnect the Power Cord InstallationRemote Control ProjectorAdjust the Lens Zoom/Focus ring Adjust the heightThrow Distance Installation For CL-510 With 1.75 2.00 LensScreen H x W Vertical OffsetThrow Distance Chart For CL-510 With 1.75 2.00 Lens Screen Hight Screen Width Min TD Max TD Vertical OffsetInstallation For CL-510LT With 2.30 3.00 Lens Throw Distance Chart For CL-510LT With 2.30 3.00 Lens Connecting Video Inputs ConnectingVideo / S-Video / Component Interlaced Video Progressive Component DTV Y/PB/PR Rgbhv DTV RGBConnecting a Computer DVI/ Hdcp Basic Operation Turning on the PowerZoom/ Focusing Selecting Video MemorySetting Menu Direct Picture Adjust Menu BypassSelecting Aspect Ratio Selecting Input Source PIP/ PBP functionTurning off the Power Menu Using the MenuMain Menu Aspect Ratio Picture Quality AdjustmentsScreens Options Setup White Balance To adjust grey scale Additional Information Replace the Lamp Contact your Runco DealerTroubleshooting Problem Possible Cause RemedySpecifications CL-510/ CL-510LT SpecificationsCsms Home Theater Calibration Ansi Lumen Specification Ansi Lumen specificationCsms Home Theater Calibration foot-Lambert fL Specification Dimensions RS-232 Setup RS-232C Control Codes PC Out AdapterRUMA-010300 rev