Installation
Attaching the Security Hooks: To help stabilize and support the added weight of the Anamorphic Lens and Lens Transport Assembly, the attachment plate includes two security hooks and related hardware for attaching the front part of the plate to the ceiling above.
Proceed as follows to attach the security hooks. This requires the following tools and materials:
•Pliers
•Scissors
•Ceiling Hooks (not supplied)
1.Install the Plate Hook Assemblies in the two “H” holes of the Attachment Plate (see diagram on page 23) with the hook ends on the ceiling side as shown above.
2.Use pliers to bend the closed hooks apart just enough to install a Chain End at a later time.
3.Attach the plate hooks to the ceiling as described in the section entitled Ceiling Mounting (Inverted) on page 27.
Runco | 25 |