Operation
4. Operation
Press M1, M2 or M3 to recall settings from a memory preset. Then, press ENTER to confirm your selection. Or, to cancel the operation, press to select Cancel and press
ENTER.
You can assign each of these three buttons to any of four |
|
|
|
memory presets. For more information, refer to M1 Key / |
| USER MEMORY |
|
|
|
| |
M2 Key / M3 Key on page 66. | M1 | M2 | M3 |
4.1
Selecting Video Memory
SHARP
Press the aspect ratio () button to select the appropriate aspect ratio for the type of program material being viewed.
4.2
Selecting an Aspect Ratio
When you turn on the
Use these buttons on the remote control to select an input source directly. You can assign each of these five buttons to any input. The default assignments are: 1 = HDMI 1, 2 = HDMI 2, 3 = Component 1, 4 =
SOURCE
1 2 3
45
▲
4.3
Selecting An Input Source
For more information, refer to 1 Key / 2 Key / 3 Key / 4 Key / 5 Key on page 66.
Runco | 45 |