Runco DTV-873 manual Tint Control, Brightness Control, Contrast Control, Color Saturation Control

Controlling

Analog Picture Controls

The analog picture controls can be adjusted with the RCU. The control keys are located on the lower right side of the key panel of the RCU and indicated with the name of the control and an icon.

When an analog picture control is pressed, a text box with bar scale and the function name of the control, e.g. ‘brightness...’ appears on the screen (only if ‘TEXT’ is ON). The length of the bar scale indicates the current memorized setting for this source. The bar scale changes as the + or - but- tons of the control are pressed.

Tint Control

Tint is only active for Video and S-Video. Tint control is effective only when using the NTSC 3.58 system. A bar scale gives a visual indication on the screen of the current tint setting while pressing the + or - buttons (RCU) or pushing the control disk to the left or to the right (local keypad). If the bar scale is not visible on the screen, press the ‘TEXT’ key once and retry the above indicated buttons.

The bar scale increases when pressing on the + button and decreases when pressing the - button.

BRIGHTNESS

40

Brightness Control

A correct ‘brightness’ setting is important for good image reproduction. Adjust the brightness with the + or - button (RCU) until the darkest parts of the picture appear black.

A bar scale gives a visual indication on the screen of the current bright- ness setting while pressing on the above indicated keys. If the bar scale is not visible on the screen, press ‘TEXT’ key once and retry the above indi- cated keys.

The bar scale increases when pressing on the + button (higher brightness) and decreases when pressing on the - button (lower brightness).

Contrast Control

A correct ‘contrast’ setting is important for good image reproduction. Adjust the contrast to the level you prefer, according to room lighting conditions. If the Contrast Control is too low, the picture will be too dim. If it is set too high, the picture may be too bright and not sharp. A bar scale gives a visual indication on the screen of the current contrast setting while pressing the + or - buttons (RCU). If the bar scale is not visible on the screen, press ‘TEXT’ key once and retry the above indicated keys.

The bar scale increases when pressing on the + button (higher contrast) and decreases when pressing on the - button (lower contrast).

Color Saturation Control

Color saturation is only active for Video and S-Video. Adjust the color intensity of the picture. Adjust the color saturation using the = and - but- tons (RCU) or pushing the control disk to the left or to the right (local keypad). A bar scale gives a visual indication on the screen of the current color setting while pressing on the above indicated buttons. If the bar scale is not visible on the screen, press ‘TEXT’ key once and retry the above indicated buttons. The bar scale increases when pressing on the + button (richer colors) and decreases when pressing the - button (lighter colors).

Sharpness Control

Sharpness control is only active for Video and S-Video. A bar scale gives a visual indication on the screen of the current sharpness setting while pressing the + or - buttons (RCU) or pushing the control disk to the left or to the right (local keypad). If the bar scale is not visible on the screen, press ‘TEXT’ key once and retry the above indicated buttons.

The bar scale increases when pressing on the + button (sharper picture) and decreases when pressing on the - button (softer picture).

The Pause key

When the Pause key is pressed, the image projection is muted but the pro- jector remains with full power for immediate restart.

To restart the image :

-Press the Pause key,

-Select a source number.

GENERAL ACCESS

SHARPNESS

TINT

COLOR

BRIGHTNESS

CONTRAST

Quit ADJUST

Select with or

then <ENTER> <EXIT> to return

The GENERAL ACCESS MENU is available from the LOCAL KEYPAD.

Press the ADJ 3X to display.

4-3