Runco DTV-873 manual Start UP of the Adjustment Mode, Adjustment mode

Page 20

START UP OF THE ADJUSTMENT MODE

Adjustment mode

All picture geometry and convergence adjustments are made while in the ‘Adjustment mode’. Two possible ways to enter the adjustment mode:

a) Using the RCU.

Press the ADJUST key.

The projector displays the path selection menu.

b) Using the local keypad.

Press the ADJUST key.

The projector displays the General access menu.

Use the control disc to highlight enter ADJUST and press ENTER. The path selection menu will be displayed.

ADJUSTEXIT

STANDBY ENTER

 

GENERAL ACCESS

 

 

SHARPNESS

 

 

TINT

5

6

COLOR

3

4

BRIGHTNESS

1

2

CONTRAST

Enter ADJUST

 

 

Select with

,

 

 

or

 

then <ENTER>.

<EXIT> to return

Note: to adjust the Analog picture control while in the ‘Adjustment mode’, press the ADJUST key. The next General Access menu will be displayed.

Push the control disc up or down to select the analog control to be adjusted and press the ENTER key to confirm.

When the analog control is adjusted the projector returns automatically to the General access menu. When you want to return to the Adjustment mode, press EXIT, otherwise select quit ADJUST and press ENTER to return to opera- tional mode.

You are now in the ‘Adjustment mode’. The control disc is used to make menu selections and also vertical and horizontal adjustments. The ENTER and EXIT keys are used to move forward and backward through the menu structure. The ADJUST key can be used to terminate the adjustment mode while a path selec- tion menu (head menu) is displayed.

There are 5 possible paths to follow once in the Adjustment mode. They are :

INSTALLATION - Installation should be selected if the projector has been relocated and/or a different screen size is desired.

When selecting ‘Installation’, the user or operator will be warned to call a qual- ified technician to perform the installation procedure (see example of projected warning on next page).

GUIDED - Guided should be selected if the user intends to perform a complete alignment of the projected image. All of the necessary geometry and conver- gence adjustments are made in a predetermined sequence.

General Access From Local Keypad

GENERAL ACCESS

SHARPNESS

TINT

COLOR

BRIGHTNESS

CONTRAST

Quit ADJUST

Select with or

then <ENTER> <EXIT> to return

ADJUSTMENT MODE

Select a path from below :

GUIDED

RANDOM ACCESS

INSTALLATION

SERVICE

EYE-Q

Source 1

Select with or then <ENTER> <EXIT> to return

5-1

Page 19 Page 21
Image 20
Page 19 Page 21
Contents DTV-873 Page Table of Contents Table of Contents Touch UP and Autoconvergence EYE-Q Diagnostics Safety Instructions Installation InstructionsMains lead Power cord with CEE 7 plug Power cord with Ansi 73.11 plugOn installation On servicingLocation and Function of Controls For Future Use IR Transmission IndicatorSound controls Not used AC Power mains Cord Connection Power CheckSwitching On/Off ConnectionsConnections Video input selectionConnecting an S-Video or Video source to the S-Video input Input selectionConnecting a RGB Analog source Connecting a RGB Analog source with Tri-level syncRgbs or RGsB input selection RGB3S or RG3sB input selectionYYB-YS or R-YYsB-Y input selection Connecting a Component sourceConnecting a Component source with Tri-level sync Data communications Remote controlYYB-Y3S or R-YY3sB-Y input selection Controlling Controlling Tint Control Brightness ControlContrast Control Color Saturation ControlStart UP of the Adjustment Mode Adjustment modeCompose Overview ‘Random Access Adjustment’ mode Random Access Adjustment ModeStarting up the random access adjustment mode Selecting Setup Pattern Internal Cross Hatch PatternRandom access adjustment mode selection menu Picture TuningSync Fast/Slow Adjustment Color BalancePeaking Line DoublerColor Select Color SelectGeometry Adjustments Horizontal Phase AdjustmentPhase Raster Shift GeometryRaster Shift Adjustment Left-Right east-west Adjustments Left Right E-WTop-Bottom north-south Adjustments TOP Bottom N-SLinearity Size AdjustmentVertical Linearity Adjustment Blanking Adjustments Top blanking Left blanking Right blanking Bottom blankingConvergence Convergence AdjustmentCoarse Convergence Adjustments Fine Convergence Adjustments Vertical cornersOverview flowchart ‘Service’ mode Service ModeStarting up the Service mode Projector Set-up IdentificationProjector SET-UP IdentificationChange Language Change passwordTotal Run Time Power up mode Change Projector AddressChange baudrate Change Projector AddressMemory management Copy a blockMemory Management Copy a BlockDeletion of blocks Deleting block by blockDeletion of all blocks Delete a BlockConvergence mid All settings to midpositionUndo all settings to midpos Common Settings Undo R & B convergence midGreen convergence mid Undo green convergence midG2 Adjustment G2 AdjustmentCRT run in cycle CRT RUN in Cycle Projector Warm UPNal # pattern and restart the CRT run in option Exit returns to the Path Selection main menuProjector warm up Enter to select the projector warm up menuI2C Diagnostics 12C DiagnosticsMESSAGES, WARNINGS, and Failures Messages, Warnings, and Failures Specifications Appendix RS 232 ControlSending a Record single instruction Command Code List $02,$00,$00,$51,$0A,$00,$00,$00,$01,$5C Overview AppendixEasy-to-use, high precision automatic convergence system Access to EYE-QTMON-SCREEN Menus EYE-QTMMENUEYE-QTMSETUP Focusing the Camera Lens Centering the Camera Centering the Camera HorizontallyCentering the Camera Vertically TOUCH-UP on Source ON/OFFReference Source TOUCH-UP on TimerAdjusting Other Sources What is Being Measured by EYE-QTM Learning a ReferenceAdjusting Screen Size On Current SourceAlign from Midposition on Current Source TOUCH-UPAlign on Current Source Align on ALL Sources On ALL SourcesTOUCH-UP on ALL Sources Interrupting the Automatic Convergence Process Error MessagesAlign from Midposition on ALL Sources No Pattern Error Status Reporting Forced BreakEYE-QTMDIAGNOSTICS APX-16 Page RUMA-003400 rev

DTV-873 specifications

The Runco DTV-873 is a premier high-definition projector that epitomizes luxury home theater technology. This state-of-the-art device is designed for audio-visual enthusiasts who demand top-tier performance and uncompromising picture quality. With its stunning 1080p resolution, the DTV-873 delivers images that are remarkably detailed and lifelike, making it an ideal choice for cinematic experiences at home.

One of the standout features of the Runco DTV-873 is its unique imaging technologies. The projector utilizes advanced DLP (Digital Light Processing) technology, which ensures smooth motion reproduction and vibrant color accuracy. The combination of DLP optics and the proprietary Runco color management system results in a vivid and true-to-life color palette. The DTV-873 boasts a contrast ratio of up to 14,000:1, producing deep blacks and brilliant highlights that captivate viewers and enhance the overall viewing experience.

The versatility of the DTV-873 also makes it a remarkable addition to any home theater setup. It supports multiple aspect ratios, including 16:9 and 2.35:1, enabling seamless integration with various screen formats. The built-in lens offset and a wide range of lens options further enhance its adaptability, allowing for effortless installation in diverse room environments.

Furthermore, the DTV-873 features Runco's proprietary Vivix processing system, which enhances the projector's video performance by significantly improving deinterlacing, scaling, and color reproduction. This technology minimizes artifacts and delivers a smoother, more immersive viewing experience. Additionally, the projector is equipped with various connectivity options, including HDMI, component, and RS-232, ensuring compatibility with a wide range of devices and easy integration into existing home entertainment systems.

The design of the DTV-873 emphasizes both aesthetics and functionality. The sleek, elegant casing is both stylish and discreet, making it an attractive addition to any home theater. The user-friendly interface allows for easy adjustments to settings, ensuring that users can quickly optimize the projector for their unique environment.

In conclusion, the Runco DTV-873 is a sophisticated and high-performing projector that combines advanced imaging technologies with elegant design. Its impressive features and capabilities make it a standout choice for anyone looking to elevate their home theater experience. Whether for movie nights, gaming, or presentations, the DTV-873 delivers unparalleled quality and performance that is sure to impress.
Top Page Image Contents