Runco DTV-873 manual Specifications

Page 47

SPECIFICATIONS

Aspect Ratios:

Anamorphc, Widescreen, 4:3

Internal Processor:

* Scan rate 33.8 KHz/540p

Bandwidth:

 

 

* Scales all inputs (Composite,

75 MHz

 

Component, S-Video)

Cabinet Dimensions:

Width: 22 in./558.80 mm

 

* Any hi-res input (DTV, computer)

 

bypasses the scaler

 

Depth: 29 in./736.60 mm

Lenses:

 

 

Height: 12 in./304.80 mm

Fully color corrected and

 

Weight: 96 lbs./43.55 kg

 

filtered HD-145 lenses

Color Balance:

3200K, 5400K, 6500K,

Light Output:

1100 lumens/200 ANSI lumens

 

9300K, Custom

Optical Resolution:

10 line pairs/mm

Configurations:

Front or rear, floor or ceiling mount

Picture Size:

5-20 ft. wide

Contrast Ratios:

100:1

Power Consumption:

475W

Convergence:

Dynamic geometry, 25 point zone

Power Requirements:

115 VAC, 50/60 Hz,

Convergence Memories: 32

 

(220V export version)

CRTs:

7 in. High performance with

Safety Regulations:

Complies with: UL, FCC Class ‘B’,

 

Astigmatism controls

 

CE, C-Tick

Environment:

32-104oF (0-40oC)

Scan Frequency:

15-50 KHz (horizontal)

Humidity:

0-90%, non-condensing

 

37-210 Hz (vertical)

Storage:

10-122oF (-12-50oC)

Inputs:

Component/RGB, Composite,

Throw Distance:

 

 

S-Video

1.33 x width (widescreens),

 

 

 

1.4 x width (4:3 screens)

 

 

Video Standards:

NTSC/PAL/SECAM

Specifications are subject to change without notice.

9-1

Page 46 Page 48
Image 47
Page 46 Page 48
Contents DTV-873 Page Table of Contents Table of Contents Touch UP and Autoconvergence EYE-Q Diagnostics Installation Instructions Safety InstructionsOn servicing Mains lead Power cord with CEE 7 plugPower cord with Ansi 73.11 plug On installationLocation and Function of Controls For Future Use IR Transmission IndicatorSound controls Not used Connections AC Power mains Cord ConnectionPower Check Switching On/OffVideo input selection ConnectionsInput selection Connecting an S-Video or Video source to the S-Video inputRGB3S or RG3sB input selection Connecting a RGB Analog sourceConnecting a RGB Analog source with Tri-level sync Rgbs or RGsB input selectionYYB-YS or R-YYsB-Y input selection Connecting a Component sourceConnecting a Component source with Tri-level sync Data communications Remote controlYYB-Y3S or R-YY3sB-Y input selection Controlling Controlling Color Saturation Control Tint ControlBrightness Control Contrast ControlAdjustment mode Start UP of the Adjustment ModeCompose Overview ‘Random Access Adjustment’ mode Random Access Adjustment ModeStarting up the random access adjustment mode Internal Cross Hatch Pattern Selecting Setup PatternColor Balance Random access adjustment mode selection menuPicture Tuning Sync Fast/Slow AdjustmentColor Select PeakingLine Doubler Color SelectGeometry Geometry AdjustmentsHorizontal Phase Adjustment Phase Raster ShiftRaster Shift Adjustment Left Right E-W Left-Right east-west AdjustmentsTOP Bottom N-S Top-Bottom north-south AdjustmentsLinearity Size AdjustmentVertical Linearity Adjustment Top blanking Left blanking Right blanking Bottom blanking Blanking AdjustmentsConvergence Convergence AdjustmentCoarse Convergence Adjustments Vertical corners Fine Convergence AdjustmentsOverview flowchart ‘Service’ mode Service ModeStarting up the Service mode Identification Projector Set-upIdentification Projector SET-UPChange Language Change passwordTotal Run Time Change Projector Address Power up modeChange Projector Address Change baudrateCopy a Block Memory managementCopy a block Memory ManagementDelete a Block Deletion of blocksDeleting block by block Deletion of all blocksConvergence mid All settings to midpositionUndo all settings to midpos Undo green convergence mid Common SettingsUndo R & B convergence mid Green convergence midCRT RUN in Cycle Projector Warm UP G2 AdjustmentG2 Adjustment CRT run in cycleEnter to select the projector warm up menu Nal # pattern and restart the CRT run in optionExit returns to the Path Selection main menu Projector warm up12C Diagnostics I2C DiagnosticsMESSAGES, WARNINGS, and Failures Messages, Warnings, and Failures Specifications RS 232 Control AppendixSending a Record single instruction Command Code List $02,$00,$00,$51,$0A,$00,$00,$00,$01,$5C Appendix OverviewEasy-to-use, high precision automatic convergence system EYE-QTMMENU Access to EYE-QTMON-SCREEN MenusEYE-QTMSETUP Focusing the Camera Lens Centering the Camera Horizontally Centering the CameraTOUCH-UP on Source ON/OFF Centering the Camera VerticallyReference Source TOUCH-UP on TimerAdjusting Other Sources Learning a Reference What is Being Measured by EYE-QTMOn Current Source Adjusting Screen SizeAlign from Midposition on Current Source TOUCH-UPAlign on Current Source Align on ALL Sources On ALL SourcesTOUCH-UP on ALL Sources Interrupting the Automatic Convergence Process Error MessagesAlign from Midposition on ALL Sources Status Reporting Forced Break No Pattern ErrorEYE-QTMDIAGNOSTICS APX-16 Page RUMA-003400 rev

DTV-873 specifications

The Runco DTV-873 is a premier high-definition projector that epitomizes luxury home theater technology. This state-of-the-art device is designed for audio-visual enthusiasts who demand top-tier performance and uncompromising picture quality. With its stunning 1080p resolution, the DTV-873 delivers images that are remarkably detailed and lifelike, making it an ideal choice for cinematic experiences at home.

One of the standout features of the Runco DTV-873 is its unique imaging technologies. The projector utilizes advanced DLP (Digital Light Processing) technology, which ensures smooth motion reproduction and vibrant color accuracy. The combination of DLP optics and the proprietary Runco color management system results in a vivid and true-to-life color palette. The DTV-873 boasts a contrast ratio of up to 14,000:1, producing deep blacks and brilliant highlights that captivate viewers and enhance the overall viewing experience.

The versatility of the DTV-873 also makes it a remarkable addition to any home theater setup. It supports multiple aspect ratios, including 16:9 and 2.35:1, enabling seamless integration with various screen formats. The built-in lens offset and a wide range of lens options further enhance its adaptability, allowing for effortless installation in diverse room environments.

Furthermore, the DTV-873 features Runco's proprietary Vivix processing system, which enhances the projector's video performance by significantly improving deinterlacing, scaling, and color reproduction. This technology minimizes artifacts and delivers a smoother, more immersive viewing experience. Additionally, the projector is equipped with various connectivity options, including HDMI, component, and RS-232, ensuring compatibility with a wide range of devices and easy integration into existing home entertainment systems.

The design of the DTV-873 emphasizes both aesthetics and functionality. The sleek, elegant casing is both stylish and discreet, making it an attractive addition to any home theater. The user-friendly interface allows for easy adjustments to settings, ensuring that users can quickly optimize the projector for their unique environment.

In conclusion, the Runco DTV-873 is a sophisticated and high-performing projector that combines advanced imaging technologies with elegant design. Its impressive features and capabilities make it a standout choice for anyone looking to elevate their home theater experience. Whether for movie nights, gaming, or presentations, the DTV-873 delivers unparalleled quality and performance that is sure to impress.
Top Page Image Contents