Runco DTV-873 Blanking Adjustments, Top blanking Left blanking Right blanking Bottom blanking

Page 31

Random Access Adjustment Mode

Blanking Adjustments

Blanking adjustments affect only the edges of the projected image and are used to frame the projected image on to the screen and to hide or black out unwanted information (or noise). A 0% on the bar scale indi- cates no blanking.

To start up the Blanking adjustments, follow the next procedure :

Push the control disc up or down to highlight BLANKING on the Geom- etry menu and the press ENTER.

The following blanking corrections are possible :

-Top blanking

-Bottom blanking

-Left blanking

-Right blanking

Therefore :

-If the internal # pattern was selected, this pattern remains on the screen.

-If the genlocked pattern was selected, the external source will be displayed.

Adjust the next blanking alignments until the image is correctly framed or the unwanted infor- mation is blanked out.

To enter a blanking alignment, push the control disc up or down to highlight a function and press ENTER to activate this function.

Press EXIT to return

GEOMETRY

HPHASE RASTER SHIFT

LEFT - RIGHT (E-W)

TOP - BOTTOM (N-S)

H & V SIZE

BLANKING

TOP

BOTTOM

LEFT

RIGHT

Select with or then <ENTER> <EXIT> to return.

Top blanking

Left blanking

Right blanking

Bottom blanking

BLANKING

TOP

BOTTOM

LEFT

RIGHT

Select with then <ENTER>

<EXIT> to return.

Adjustment of the blanking on the top of the image.

Adjustment of the blanking on the bottom of the image.

Adjustment of the blanking on the left side.

Adjustment of the blanking on the right side.

6-10

Page 30 Page 32
Image 31
Page 30 Page 32
Contents DTV-873 Page Table of Contents Table of Contents Touch UP and Autoconvergence EYE-Q Diagnostics Installation Instructions Safety InstructionsOn servicing Mains lead Power cord with CEE 7 plugPower cord with Ansi 73.11 plug On installationLocation and Function of Controls Sound controls Not used IR Transmission IndicatorFor Future Use Connections AC Power mains Cord ConnectionPower Check Switching On/OffVideo input selection ConnectionsInput selection Connecting an S-Video or Video source to the S-Video inputRGB3S or RG3sB input selection Connecting a RGB Analog sourceConnecting a RGB Analog source with Tri-level sync Rgbs or RGsB input selectionConnecting a Component source with Tri-level sync Connecting a Component sourceYYB-YS or R-YYsB-Y input selection YYB-Y3S or R-YY3sB-Y input selection Remote controlData communications Controlling Controlling Color Saturation Control Tint ControlBrightness Control Contrast ControlAdjustment mode Start UP of the Adjustment ModeCompose Starting up the random access adjustment mode Random Access Adjustment ModeOverview ‘Random Access Adjustment’ mode Internal Cross Hatch Pattern Selecting Setup PatternColor Balance Random access adjustment mode selection menuPicture Tuning Sync Fast/Slow AdjustmentColor Select PeakingLine Doubler Color SelectGeometry Geometry AdjustmentsHorizontal Phase Adjustment Phase Raster ShiftRaster Shift Adjustment Left Right E-W Left-Right east-west AdjustmentsTOP Bottom N-S Top-Bottom north-south AdjustmentsVertical Linearity Adjustment Size AdjustmentLinearity Top blanking Left blanking Right blanking Bottom blanking Blanking AdjustmentsCoarse Convergence Adjustments Convergence AdjustmentConvergence Vertical corners Fine Convergence AdjustmentsStarting up the Service mode Service ModeOverview flowchart ‘Service’ mode Identification Projector Set-upIdentification Projector SET-UPTotal Run Time Change passwordChange Language Change Projector Address Power up modeChange Projector Address Change baudrateCopy a Block Memory managementCopy a block Memory ManagementDelete a Block Deletion of blocksDeleting block by block Deletion of all blocksUndo all settings to midpos All settings to midpositionConvergence mid Undo green convergence mid Common SettingsUndo R & B convergence mid Green convergence midCRT RUN in Cycle Projector Warm UP G2 AdjustmentG2 Adjustment CRT run in cycleEnter to select the projector warm up menu Nal # pattern and restart the CRT run in optionExit returns to the Path Selection main menu Projector warm up12C Diagnostics I2C DiagnosticsMESSAGES, WARNINGS, and Failures Messages, Warnings, and Failures Specifications RS 232 Control AppendixSending a Record single instruction Command Code List $02,$00,$00,$51,$0A,$00,$00,$00,$01,$5C Appendix OverviewEasy-to-use, high precision automatic convergence system EYE-QTMMENU Access to EYE-QTMON-SCREEN MenusEYE-QTMSETUP Focusing the Camera Lens Centering the Camera Horizontally Centering the CameraTOUCH-UP on Source ON/OFF Centering the Camera VerticallyAdjusting Other Sources TOUCH-UP on TimerReference Source Learning a Reference What is Being Measured by EYE-QTMOn Current Source Adjusting Screen SizeAlign on Current Source TOUCH-UPAlign from Midposition on Current Source TOUCH-UP on ALL Sources On ALL SourcesAlign on ALL Sources Align from Midposition on ALL Sources Error MessagesInterrupting the Automatic Convergence Process Status Reporting Forced Break No Pattern ErrorEYE-QTMDIAGNOSTICS APX-16 Page RUMA-003400 rev

DTV-873 specifications

The Runco DTV-873 is a premier high-definition projector that epitomizes luxury home theater technology. This state-of-the-art device is designed for audio-visual enthusiasts who demand top-tier performance and uncompromising picture quality. With its stunning 1080p resolution, the DTV-873 delivers images that are remarkably detailed and lifelike, making it an ideal choice for cinematic experiences at home.

One of the standout features of the Runco DTV-873 is its unique imaging technologies. The projector utilizes advanced DLP (Digital Light Processing) technology, which ensures smooth motion reproduction and vibrant color accuracy. The combination of DLP optics and the proprietary Runco color management system results in a vivid and true-to-life color palette. The DTV-873 boasts a contrast ratio of up to 14,000:1, producing deep blacks and brilliant highlights that captivate viewers and enhance the overall viewing experience.

The versatility of the DTV-873 also makes it a remarkable addition to any home theater setup. It supports multiple aspect ratios, including 16:9 and 2.35:1, enabling seamless integration with various screen formats. The built-in lens offset and a wide range of lens options further enhance its adaptability, allowing for effortless installation in diverse room environments.

Furthermore, the DTV-873 features Runco's proprietary Vivix processing system, which enhances the projector's video performance by significantly improving deinterlacing, scaling, and color reproduction. This technology minimizes artifacts and delivers a smoother, more immersive viewing experience. Additionally, the projector is equipped with various connectivity options, including HDMI, component, and RS-232, ensuring compatibility with a wide range of devices and easy integration into existing home entertainment systems.

The design of the DTV-873 emphasizes both aesthetics and functionality. The sleek, elegant casing is both stylish and discreet, making it an attractive addition to any home theater. The user-friendly interface allows for easy adjustments to settings, ensuring that users can quickly optimize the projector for their unique environment.

In conclusion, the Runco DTV-873 is a sophisticated and high-performing projector that combines advanced imaging technologies with elegant design. Its impressive features and capabilities make it a standout choice for anyone looking to elevate their home theater experience. Whether for movie nights, gaming, or presentations, the DTV-873 delivers unparalleled quality and performance that is sure to impress.
Top Page Image Contents