Sharp PG-D2510X appendix Rear View Terminals

1 2 3 4 5 6 7

8 9

13

10 11 12

Introduction

Rear View (Terminals)

1RS-232C terminal 24

Terminal for controlling the projector using a computer.

2USB terminal 34

Terminal connecting with the USB terminal on the computer for using the supplied remote control as the computer mouse.

3AUDIO OUT terminal 23

Audio output terminal of equipment connected to the audio input terminal.

4MONITOR OUT* terminal 23

(Output terminal for computer RGB and component signals)

Terminal for connecting a monitor.

COMPUTER/COMPONENT 2* input terminal 21, 22

Terminal for computer RGB and component signals.

* You must switch the setting depending on whether you are using the terminal for MONITOR OUT or COMPUTER/COMPONENT 2 input.

5AUDIO 1 input terminal 23

6COMPUTER/COMPONENT 1 input terminal 21, 22

Terminal for computer RGB and component signals.

7S-VIDEO input terminal 22

Terminal for connecting video equipment with an S-video terminal.

8VIDEO input terminal 22

Terminal for connecting video equipment.

9AUDIO 2 input terminal 23

10AC socket 24

Connect the supplied power cord.

11Kensington Security Standard connector

12Rear adjustment foot 27

13Security bar

Using the Kensington Lock

•This projector has a Kensington Security Standard connector for use with a Kensington MicroSaver Security System. Refer to the information that came with the system for instructions on how to use it to secure the projector.

13