Motorola WA840G manual LED Description, Led, Condition Color Status, None

SECTION 1 OVERVIEW

LED Description

The underlined items represent network activity.

	LED	Condition	Color	Status
1	Power	ON	Green	The device is powered on and operating normally.
		Blinking	Green	Firmware update is in progress.
		Blinking/ON	Red	The power LED turns RED as soon as the reset
				button is depressed. If the reset button is held down
				for more than 5 seconds, the LED starts to blink
				during which the access point’s default user name,
				password and IP address will be restored. The LED
				then turns OFF until the reset button is released. The
				power LED blinks RED if the firmware is corrupted
				indicating the firmware needs to be restored.
2 Wireless		OFF	None	No mobile station or access point has been
				associated with this device.
		ON	Red	The wireless interface has been disabled by the
				firmware.
		ON/Blinking	Green	802.11b/802.11g connection exists in this wireless
				domain/active traffic present.
3	Device	OFF	None	No external Ethernet device has been attached and
				detected. The Ethernet link is down.
		ON/Blinking	Amber	10BaseT link detected/active traffic present.
		ON/Blinking	Green	100BaseT link detected/active traffic present.

1-12 WA840G