Motorola WA840G manual Field Description, Extended Service Set ESS . Authentication

Page 43

SECTION 3

CONFIGURATION

 

 

Field

Description

 

ESS

Extended Service Set (ESS). Authentication

Authentication

establishes either an open or secure

 

verification of communication with an access

 

point. This setting does not encrypt your

 

wireless transmission.

 

The options are:

 

 

Open

No authentication is used.

 

System

Default setting.

 

Pre-Shared

The Pre-Shared Key (PSK)

 

Key (PSK)

authentication method is

 

 

used.

 

WPA

Wi-Fi®Protected Access

 

 

(WPA) authentication

 

 

(802.1X) is used with an EAP

 

 

type.

 

WPA-PSK

WPA authentication (802.1X)

 

 

is used with a pre-shared

 

 

key.

WPA-PSK is recommended for home users not using a RADIUS server.

3-6

WA840G

Image 43
Contents User Guide Wireless Access Point FCC Compliance Class B Digital Device Canadian Compliance Contents Glossary Overview Overview Wireless ConnectivitySecure Transmission Overview Section FeaturesUnderstanding Your User Guide Wireless Connections Box ContentsTCP/IP Closed Area Positioning Your Access PointWireless Range Data Rate Open AreaTechnical Specifications WDS Access Point Mode Access Point ModeType of Networks Back of Access Point Access Point Physical DescriptionFeature Description Front of Access Point None LED DescriptionLED Condition Color StatusAntenna Installation Hardware SetupAccess Point Physical Installation InstallationVertical Installation Installation Section80.00mm Installation Section Mm .3 inches maximum 10.5 mm .4 inches maximum Easy Software Setup Electrical Connection to Access PointWired Connection to Access Point Manual Software SetupWireless Connection to Access Point Not using Dhcp Continue to use the Static IP settings Configure Your ComputersSelect Settings Control Panel Configuring Windows 98SE and MEInstallation Configuring Windows Ensure the box next to Internet Protocol TCP/IP is selected Installation Section Configuring Windows XP Installation Section Installation Logging Configure Your Wireless Security SettingsSelect Control Panel Device Security Wireless Security SetupSelect to Wireless Basic Navigate to Wireless SecurityUsing the Web-Based Configuration Utility ConfigurationFor convenience, it is recommended that you finish ConfigurationNavigation Help, Restart, and LogoutField or Button Description Configuration SectionConfiguring Wireless Network Settings Basic Wireless ConfigurationConfiguration FieldDescription Configuring Wireless Security SettingsField Description Extended Service Set ESS . AuthenticationTkip is recommended for home users. If If you are using other non-Motorola wireless Field Configuration Configuration Section Monitoring Wireless Access Points Site Survey Field Description Station Association ListAdvanced Wireless Configuration Configuration Auto Mbps DefaultDisable AllConfiguring Control Panel Settings Dhcp Configuring Network AddressConfiguring Device Security Updating Firmware Defaults Saving and Restoring Configuration SettingsContact Hardware SolutionsTroubleshooting Software Solutions Troubleshooting SectionStart button to ProgramsAccessoriesCommand Prompt Cannot access the Configuration Utility for the access point Troubleshooting Section Troubleshooting Ascii Dhcp GlossaryBSS CPEDsss Glossary SectionDNS DSLFTP ESSGUI Ieee HexadecimalHost IcmpMTU IsdnISP LANPing NATNIC PcmciaPptp PPPROM Smtp RTSTCP/IP TCPUDP WAP USBVPN WANWPA WlanWWW Mgbi