Motorola WA840G manual Configuration

Page 47

SECTION 3

CONFIGURATION

 

 

Field

Description

Group Key

This is the number of seconds that pass until

Renewal Interval

your access point sends out a new group key

 

and is only available if WPA or 802.1X are

 

selected.

 

The default is 300 seconds.

RADIUS Server

IP

RADIUS Server

Port Number

RADIUS Shared

Secret

RADIUS Shared

Secret

Confirmation

Enter the RADIUS Server IP and Port number. RADIUS is an authentication and accounting system to verify users.

To display these fields, either of the following conditions need to exist:

!Open System is selected, along with either WEP64 or WEP128, and 802.1X is enabled

!WPA is selected and TKIP or AES is selected.

The default RADIUS Port Number is 1812.

Type and re-type the RADIUS password in these fields.

3-10

WA840G

Image 47
Contents User Guide Wireless Access Point FCC Compliance Class B Digital Device Canadian Compliance Contents Glossary Overview Secure Transmission Wireless ConnectivityOverview Overview Section FeaturesUnderstanding Your User Guide Wireless Connections Box ContentsTCP/IP Closed Area Positioning Your Access PointWireless Range Data Rate Open AreaTechnical Specifications Type of Networks Access Point ModeWDS Access Point Mode Feature Description Access Point Physical DescriptionBack of Access Point Front of Access Point None LED DescriptionLED Condition Color StatusAntenna Installation Hardware SetupAccess Point Physical Installation InstallationVertical Installation Installation Section80.00mm Installation Section Mm .3 inches maximum 10.5 mm .4 inches maximum Easy Software Setup Electrical Connection to Access PointWired Connection to Access Point Manual Software SetupWireless Connection to Access Point Not using Dhcp Continue to use the Static IP settings Configure Your ComputersSelect Settings Control Panel Configuring Windows 98SE and MEInstallation Configuring Windows Ensure the box next to Internet Protocol TCP/IP is selected Installation Section Configuring Windows XP Installation Section Installation Logging Configure Your Wireless Security SettingsSelect Control Panel Device Security Wireless Security SetupSelect to Wireless Basic Navigate to Wireless SecurityUsing the Web-Based Configuration Utility ConfigurationFor convenience, it is recommended that you finish ConfigurationNavigation Help, Restart, and LogoutField or Button Description Configuration SectionConfiguring Wireless Network Settings Basic Wireless ConfigurationConfiguration FieldDescription Configuring Wireless Security SettingsField Description Extended Service Set ESS . AuthenticationTkip is recommended for home users. If If you are using other non-Motorola wireless Field Configuration Configuration Section Monitoring Wireless Access Points Site Survey Field Description Station Association ListAdvanced Wireless Configuration Configuration Auto Mbps DefaultDisable AllConfiguring Control Panel Settings Dhcp Configuring Network AddressConfiguring Device Security Updating Firmware Defaults Saving and Restoring Configuration SettingsContact Hardware SolutionsTroubleshooting Start button to ProgramsAccessoriesCommand Prompt Troubleshooting SectionSoftware Solutions Cannot access the Configuration Utility for the access point Troubleshooting Section Troubleshooting Ascii Dhcp GlossaryBSS CPEDsss Glossary SectionDNS DSLGUI ESSFTP Ieee HexadecimalHost IcmpMTU IsdnISP LANPing NATNIC PcmciaROM PPPPptp Smtp RTSUDP TCPTCP/IP WAP USBVPN WANWWW WlanWPA Mgbi