Motorola WA840G manual Configuration

Page 41

SECTION 3		CONFIGURATION

Field or Button	Description
Channel Number	Identifies the channel on which the access point
	communicates. Each wireless client must use
	the same channel to enable communication. If
	changed wirelessly, once you restart the access
	point, you will lose your wireless connection.
	Change the wireless device’s channel to the
	new channel to log back into the access point.
	The default is Channel 11.
Operation Mode	Enables you to select the type of transmission
	protocol your wireless network uses.
	The options are:
	! Compatibility (802.11b/g) – default setting
	!	Performance (802.11g only)
	!	Legacy (802.11b only)
Wireless MAC	Displays the MAC address of the unit.
Address
Apply	Click to save your settings.
Cancel	Click to cancel any changes.

3-4

WA840G

Image 41

Contents User Guide Wireless Access Point FCC Compliance Class B Digital Device Canadian Compliance Contents Glossary Overview Secure Transmission Wireless ConnectivityOverview Overview Section FeaturesUnderstanding Your User Guide Wireless Connections Box ContentsTCP/IP Wireless Range Positioning Your Access PointData Rate Open Area Closed AreaTechnical Specifications Type of Networks Access Point ModeWDS Access Point Mode Feature Description Access Point Physical DescriptionBack of Access Point Front of Access Point LED LED DescriptionCondition Color Status NoneAntenna Installation Hardware SetupAccess Point Physical Installation InstallationVertical Installation Installation Section80.00mm Installation Section Mm .3 inches maximum 10.5 mm .4 inches maximum Easy Software Setup Electrical Connection to Access PointWired Connection to Access Point Manual Software SetupWireless Connection to Access Point Not using Dhcp Continue to use the Static IP settings Configure Your ComputersSelect Settings Control Panel Configuring Windows 98SE and MEInstallation Configuring Windows Ensure the box next to Internet Protocol TCP/IP is selected Installation Section Configuring Windows XP Installation Section Installation Logging Configure Your Wireless Security SettingsSelect to Wireless Basic Wireless Security SetupNavigate to Wireless Security Select Control Panel Device SecurityUsing the Web-Based Configuration Utility ConfigurationNavigation ConfigurationHelp, Restart, and Logout For convenience, it is recommended that you finishConfiguring Wireless Network Settings Configuration SectionBasic Wireless Configuration Field or Button DescriptionConfiguration FieldDescription Configuring Wireless Security SettingsField Description Extended Service Set ESS . AuthenticationTkip is recommended for home users. If If you are using other non-Motorola wireless Field Configuration Configuration Section Monitoring Wireless Access Points Site Survey Field Description Station Association ListAdvanced Wireless Configuration Configuration Disable Mbps DefaultAll AutoConfiguring Control Panel Settings Dhcp Configuring Network AddressConfiguring Device Security Updating Firmware Defaults Saving and Restoring Configuration SettingsContact Hardware SolutionsTroubleshooting Start button to ProgramsAccessoriesCommand Prompt Troubleshooting SectionSoftware Solutions Cannot access the Configuration Utility for the access point Troubleshooting Section Troubleshooting Ascii BSS GlossaryCPE DhcpDNS Glossary SectionDSL DsssGUI ESSFTP Host HexadecimalIcmp IeeeISP IsdnLAN MTUNIC NATPcmcia PingROM PPPPptp Smtp RTSUDP TCPTCP/IP VPN USBWAN WAPWWW WlanWPA Mgbi