Motorola WA840G manual Installation Section

Page 22

INSTALLATION

SECTION 2

 

 

2Click the Print icon or choose Print from the File menu to display the Print dialog box:

In both the Pages from and to fields, enter the page number on which the Wall Mounting Template appears.

Be sure you print the template at 100% scale and that Fit to page is not checked in the Print dialog box.

3Click OK.

4Measure the printed template with a ruler to ensure that it is the correct size.

5Use a center punch to mark the center of the holes on the wall.

6On the wall, locate the marks for the mounting holes you just made.

WARNING!

Before drilling holes, check the structure for potential damage to water, gas, or electric lines.

7Drill the holes to a depth of at least 3.8 cm (1½ inches).

WA840G

2-5

Image 22
Contents User Guide Wireless Access Point FCC Compliance Class B Digital Device Canadian Compliance Contents Glossary Overview Overview Wireless ConnectivitySecure Transmission Features Overview SectionUnderstanding Your User Guide Box Contents Wireless ConnectionsTCP/IP Data Rate Open Area Positioning Your Access PointWireless Range Closed AreaTechnical Specifications WDS Access Point Mode Access Point ModeType of Networks Back of Access Point Access Point Physical DescriptionFeature Description Front of Access Point Condition Color Status LED DescriptionLED NoneHardware Setup Antenna InstallationInstallation Access Point Physical InstallationInstallation Section Vertical Installation80.00mm Installation Section Mm .3 inches maximum 10.5 mm .4 inches maximum Electrical Connection to Access Point Easy Software SetupManual Software Setup Wired Connection to Access PointWireless Connection to Access Point Configure Your Computers Not using Dhcp Continue to use the Static IP settingsConfiguring Windows 98SE and ME Select Settings Control PanelInstallation Configuring Windows Ensure the box next to Internet Protocol TCP/IP is selected Installation Section Configuring Windows XP Installation Section Installation Configure Your Wireless Security Settings LoggingNavigate to Wireless Security Wireless Security SetupSelect to Wireless Basic Select Control Panel Device SecurityConfiguration Using the Web-Based Configuration UtilityHelp, Restart, and Logout ConfigurationNavigation For convenience, it is recommended that you finishBasic Wireless Configuration Configuration SectionConfiguring Wireless Network Settings Field or Button DescriptionConfiguration Configuring Wireless Security Settings FieldDescriptionExtended Service Set ESS . Authentication Field DescriptionTkip is recommended for home users. If If you are using other non-Motorola wireless Field Configuration Configuration Section Monitoring Wireless Access Points Field Description Station Association List Site SurveyAdvanced Wireless Configuration Configuration All Mbps DefaultDisable AutoConfiguring Control Panel Settings Configuring Network Address DhcpConfiguring Device Security Updating Firmware Saving and Restoring Configuration Settings DefaultsHardware Solutions ContactTroubleshooting Software Solutions Troubleshooting SectionStart button to ProgramsAccessoriesCommand Prompt Cannot access the Configuration Utility for the access point Troubleshooting Section Troubleshooting Ascii CPE GlossaryBSS DhcpDSL Glossary SectionDNS DsssFTP ESSGUI Icmp HexadecimalHost IeeeLAN IsdnISP MTUPcmcia NATNIC PingPptp PPPROM RTS SmtpTCP/IP TCPUDP WAN USBVPN WAPWPA WlanWWW Mgbi