Motorola WE800G manual LED Description, Led, Condition Color Status Power, Wireless, Device

Section 1 Overview

LED Description

The underlined items represent network activity.

LED	Condition	Color	Status
1. Power	ON	Green	The device is powered on and operating normally.
	Blinking	Green	Firmware update is in progress.
	Blinking/ON	Red	The power LED turns red as soon as the reset
			button is depressed.
			If the reset button is held down for more than five
			seconds, the LED starts to blink, during which time
			the WE800G’s default user name, password, and
			IP address will be restored. The LED then turns off
			until the reset button is released.
			The power LED continuously blinks red if the
			firmware is corrupted. The firmware needs to be
			restored.
2. Wireless	OFF	None	No mobile station or AP has associated with this
			device.
	ON	Red	The wireless interface has been disabled by the
			firmware.
	ON/Blinking	Green	Connection exists in this wireless domain/active
			traffic present.
3. Device	OFF	None	No external Ethernet device has been attached
			and detected. The Ethernet link is down.
	ON/Blinking	Amber	10BaseT link detected/active traffic present.
	ON/Blinking	Green	100BaseT link detected/active traffic present.

1-14 WE800G