AMD GA-K8N51GMF-9 user manual Completing the RAID Bios Setup

Completing the RAID BIOS Setup

After assigning your RAID array disks, press F7. The Clear disk data prompt appears.

MediaShield RAID Utility July 27 2005

- Define a New Array -

RAID Mode: Mirroring				Striping Block: Optimal
Free Disks		Clear disk dataArray? Disks
Loc	Disk Model	Capacity		Loc	Disk Model	Capacity
		[Y] YES		1.0.M	ST3120026AS	111.79GB
				[N] NO	ST3120026AS	111.79GB
		[	] Add	1.1.M
		[	] Del
	[ESC] Quit	[F6] Back [F7] Finish	[TAB] Navigate		[ ] Select	[ENTER] Popup

Press Y if you want to wipe out all the data from the RAID array, otherwise press N. You must choose Yes if the drives were previously used as RAID drives. The Array List window appears, where you can review the RAID arrays that you have set up.

You can select a disk array as boot device if you want to boot operating system from an array. Use the arrow keys to select the array, then press B to specify the array as bootable.

MediaShield RAID Utility July 27 2005

- Array List -

Boot	Id	Status		Vendor	Array Model Name
No	2	Healthy		NVIDIA	MIRROR 111.79G
[Ctrl-X] Exit	[	] Select	[B] Set Boot		[N] New Array [ENTER] Detail

English

- 67 - Appendix