Using The Web Interface
Establishing And Modifying Scenes
Once your dimmers have been addressed and states set, you can create a scene. A scene is a collection of dimmers with specific states for each dimmer, i.e., Scene 1 could be set as a meeting scene where Dimmers 1 and 12 ramp down to 45%, Dimmers 6 and 14 ramp to 80% and Dimmers 2 through 5 ramp to 0% and all dimmers delay 10 seconds after the scene is selected before initiating. A dimmer can be a part of many different scenes. To create a scene:
1.Click the Scenes button at the top of the page. Shown below is the Scene page.
FIG. 5 Scene Page
2.Click the Modify button for the Scene you would like to set. This opens the Modify Scene page.
| 8 | |
|
|
|