Command Interface

Advanced Programming

The interface code controls the lighting controller via command events (NetLinx command send_command). These commands are sent to the Duet module to affect control. Below are the commands supported. In order to be able to control a specific lighting component (dimmer/keypad) you must first add that component to the list of components to track. See LIGHTADD- <index>,<addr> and KEYPADADD-<index>,<addr>.

* Denotes an extended/advanced command beyond the standard API.

Command Interface

Command

Description

*ADDRESSING-<state>Place the H48 in addressing/programming mode. This mode is used to program a Dimmer address. Once the H48 is in addressing mode, triple-tap the dimmer you want to set the address for, and use the SETADDRESS- command to set the address of that Dimmer.

		<state>: 1=ON
		0=OFF
		Example:
		ADDRESSING-1

*	?ADDRESSING	Query the addressing/programming state of the H48.
		Responds with ADDRESSING-<state>
		Example:
		?ADDRESSING

CLOCK-<mm/dd/yyyy>		Set the device date/time. For time use military format.
	<hh:mm:ss>	Example:
		CLOCK-12/10/2004 13:05:50

*	?CLOCK	Query for the date/time.
		Example:
		?CLOCK

DEBUG-<value>		Enables or disables the debug feature.
		<value>: 1 = Error
		2 = Warning
		3 = Debug
		4 = Info
		DEBUG=1 (default)

?DEBUG		Request the state of the debug feature.
		?DEBUG

* DELSCENE-<sceneNmbr>		Deletes a scene.
		<sceneNmbr>: 1..48
		Example:
		DELSCENE-1

ALD-H48 Lighting Controller	23