Using The Web Interface
FIG. 6 Modify Scene
3.Moving left to right the first field is a check box. Placing a check in the box includes the dimmer in the scene.
Once you have all of your desired dimmers selected you can set the Delay time.
The delay time is the duration, in 1/10ths of seconds, it takes the dimmers to respond to the button push.
4.Type a number value in the field Delay Time. The next field is the ramp time.
The ramp time is the duration, in 1/10ths of seconds, it takes the dimmers to go from their current intensity state to that set in the scene.
5.Type a number value in the field Ramp Time. The next field is intensity.
Intensity is a percentage value,
6.Type a number value in the field Intensity.
7.Click Save to set your scene.
Global Adjustment allows you to select and deselect all dimmers at one time, and to set the Delay Time, Ramp Time and Intensity values for all dimmers, to the same value.
When modifying scenes, ignored dimmers will display their current intensity level while dimmers included in the scene will display their defined intensity level, not necessarily the current state.
9 |
| |
|
|
|