Using The Touch Panel Pages
FIG. 11 Groups Page
The sample touch panel only includes support for 2 groups but the system supports 48 groups. There is a limited amount of editing functionality available on the test pages. While it is not possible to delete a group from this page once the group has been established, you can overwrite an existing group.
To Group 1 - Open control of dimmers associated with Group 1.
To Group 2 - Open control of dimmers associated with Group 2.
Reset - Clears selected dimmers from the group and returns it to the last saved state.
Level Up/Down - Ramps the selected group up and down.
Creating A Group
1.Push either button To Group 1 or To Group 2, depending on which one you want to set.
2.Push the address buttons for all of the dimmers you want included in the group.
3.Push the To Group... button previously selected in Step 1. The page then gives you a confirmation.
Setting a group overwrites any previous group settings.
While you are selecting dimmers for a group you can deselect all addresses by pushing the Reset button, this will not remove dimmers already established within that group.
15 |
| |
|
|
|