Agilent Technologies E1364A service manual Packaging/Shipping Guidelines

Page 15

Shipping Guidelines Follow the steps in Figure 1-3 to return the E1364A Switch Module to an Agilent Technologies Sales and Support Office or Service Center.

1. Prepare the Switch

• Remove user wiring from terminal module.

• Attach tag to switch that identifies:

– Owner

– Model Number/Serial Number

– Service Required

• Place tagged device in approved anti-static bag.

2. Package the Switch

• Place packaged switch in shipping carton.*

• Place 75 to 100 mm (3 to 4 inches) of shock-absorbing material around the module.

• Seal the shipping container securely.

• Mark the shipping container FRAGILE.

3. Ship the Switch to Hewlett-Packard

• Place address label on shipping carton.

• Send carton to Agilent Technologies.

*We recommend that you use the same shipping materials as those used in factory packaging (available from Agilent). For other (commercially available) shipping materials, use a double-walled carton with minimum 2.4 MPa (350 psi) test.

Figure 1-3. Packaging/Shipping Guidelines

Chapter 1

General Information 15

Image 15

Contents Serial Numbers Agilent E1364A Channel Form C Switch ModulePage Contents Appendix B. Backdating Information Exclusive Remedies WarrantyLimitation Of Warranty CertificationDocumentation History Safety SymbolsModel Number Manufacturer’s NameManufacturer’s Address Declares, that the product Product NamePage Page Page Introduction Agilent E1364A Form C Switch ModuleGeneral Information Chapter Safety ConsiderationsChapter General Information Initial Incoming Inspection Guidelines Inspection/ShippingPackaging/Shipping Guidelines Switch Description Temperature HumidityEnvironment Requirements Recommended Model Use Recommended Test EquipmentGeneral Information Chapter Verification Tests Operation Verification Functional VerificationPerformance Verification 1a. Agilent E1364A Test Fixture Schematic1b. Agilent E1364A Test Fixture Test 2-1 Closed-Channel Resistance Test Normally Closed Resistance Test Next 530 540 END Test 2-2 DC Isolation Test Normally Closed to Chassis 1. Hardware Connections DC Isolation Test NC Channels to Chassis Example DC Isolation Test Verification Tests Chapter Test Accuracy Ratio TAR Performance Test RecordPerformance Test Record for the E1364A Switch Module Page 1 Performance Test Record for the E1364A Switch Module Page 2 Maximum Uncert Test Measured Description MinimumTest Measured Description Minimum Reading Maximum Uncert Performance Test Record for the E1364A Switch Module Page 4Verification Tests Chapter Replaceable Parts Lists Part Qty Part DescriptionNumber Replaceable Parts Chapter E1364A Terminal Block Replaceable Parts Replaceable Parts Chapter Service Identifying the Problem Troubleshooting TechniquesE1364A Tests/Checks Test/Check Reference Designator Testing the AssemblyESD Precautions Repair and Maintenance GuidelinesFunctional Verification Test Verification Tests C ProgramsExample Closed Channel Resistance Test Performance Verification TestsClose instrument session Example DC Isolation Test Iclose dm Example C Programs Appendix a Reference Part Qty Part Description Designator Number Replaceable Parts ListQty Part Description Part NumberAgilent E1364A Reference Designators Figure B-1. E1364A Component Assembly Parts Figure B-2. E1364A Terminal Module Replaceable Parts Page Page Copyright Agilent Technologies, Inc