MULTITASKER™
41.[HELP]
This command displays information available for the MultiTasker interface commands.
Command Format: [HELPCnUi]
Cn | = card ID (n = # from 1 to max slots) |
Ui | = Unit ID (i = # from 0 to 9) |
Example:
Display the
GROUP COMMANDS
The next few commands are group commands. The use of groups allows several boards, with the same functions, to be controlled simultaneously with a single command. These commands apply to all cards, not only the
42.[WR]
This command groups multiple cards in the enclosure allowing all the group members to be controlled simultaneously with the same command. Each MultiTasker unit may define a maximum of eight groups.
In systems with audio and video cards, the cards are typically grouped as follows:
Group 1 = Video Cards
Group 2 = Audio Cards
Group 3 = Video and Audio Cards
Command Format: [WRCn1Cn2…GkUi]
Cn | = Card ID (n = slot # from 1 to max slots) |
Gk | = Group number (k = # from |
Ui | = Unit ID (i = # from |
Example:
Group cards 2, 4, and 6 as Group 5 of Unit ID 1 by sending [WRC2C4C6G5U1]. After executing this command, cards 2, 4 and 6 will be grouped together as Group 5 of Unit ID 1. The system will return the following feedback:
[G5=C2C4C6]
18 |
Now, when a command is sent to G5, each board in G5 will execute the same command.
43.[RMC]
This command may be used to remove one or more group members from a group. Reset the system after using this command for all changes to take effect.
Command Format: [RMCn1Cn2…GkUi]
Cn | = Card ID (n= # from 1 to max slots) |
Gk | = Group ID (k = # from |
Ui | = Unit ID (i = # from |
Example:
Group 5 consists of the cards located in slots numbered 2, 4, and 6. Remove just cards 4 and 6 from the group by sending the command [RMC4C6G1]. The system will return the following feedback:
[G5=C2]
44.[RMG]
This command may be used to delete an entire group, or all groups.
REMOVE A GROUP
Remove all the members from the group, effectively deleting the group.
Command Format: [RMGkUi]
Gk = Group ID (k = # from
Ui = Unit ID (i = # from
Example:
Group 5 consists of the cards located in slots number 2, 4 and 6. Remove all cards from the group by sending the command [RMG5]. The system will return the following feedback:
[G5=0]
REMOVE ALL GROUPS
Remove all the members from every group, effectively deleting all groups.
Command Format: [RMG*Ui]
Ui = Unit ID (i = # from
18