23.[TEST]
This command performs a test on the internal memory. Upon completion, the system will display the results. If there are no problems, the system will display the following:
MEMORY IS GOOD
Otherwise, failures will be indicated.
Command Format: [TESTCnUi]
Cn = Card ID (n = slot # from 1 to max slots)
Ui = Unit ID (i = # from 0 to 9)
Example:
There is an
24.[MATmXy]
This matrix command allows the matrix switcher to be setup for different matrix sizes. The tables below show how the inputs and outputs will be configured when the matrix is changed.
Example:
In the 8x4 configuration, when Input 1 is connected to Output 8, the entire channel, 1a and 1b, will be switched to outputs 8a and 8b respectively.
Command Format: [MATmXyCnUi]
m = number of inputs (m = 16, 8 or 4)
y = number of outputs (y = 8, 4 or 2)
Cn = Card ID (n = slot # from 1 to max slots)
Ui = Unit ID (i = # from 0 to 9)
4 X 2
IN |
| OUT | |
O3a | O1a |
| O1a |
O3b | O1b |
| O1b |
O3c | O1c |
| O1c |
O3d | O1d |
| O1d |
O4a | O2a |
| O2a |
O4b | O2b |
| O2b |
O4c | O2c |
| O2c |
O4d | O2d |
| O2d |
25.[HELP]
This command displays information available for the
Command Format: [HELPCnUi]
Cn = Card ID (n = # from 1 to max slots)
Ui = Unit ID (i = # from 0 to 9)
Example:
In order to display the
GROUP COMMANDS
The next few commands are group commands. The use of groups allows several boards, with the same functions, to be controlled simultaneously with a single command. These commands apply to all cards, not only the
26.[WR]
This command groups multiple cards in the enclosure allowing all the group members to be
16 X 8
IN
O9 O1
O10 O2
O11 O3
O12 O4
O13 O5
O14 O6
O15 O7
O16 O8
OUT
O1
O2
O3
O4
O5
O6
O7
O8
8 X 4
IN
O5a O1a
O5b O1b
O6a O2a
O6b O2b
O7a O3a
O7b O3b
O8a O4a
O8b O4b
OUT
O1a
O1b
O2a
O2b
O3a
O3b
O4a
O4b
controlled simultaneously with the same command. Each
In
Group 1 = Video Cards
Group 2 = Audio Cards
Group 3 = Video and Audio Cards
16 |
16