7.4.5 MENU MODE EXAMPLES
All MENU MODE examples assume an
NOTE When entering numeric values (not selecting menu items) the system may echo each character as it is typed depending on the settings of the communication software. For example, entering an input number of 03 may appear as 0033 on the screen.
1. Select MT105-100 card for control.
Follow the keystrokes below to select the
Enter | List available cards |
01Select
1Select CONTROL Menu
1 | Select Card/Group Select |
0 | Select This Card (card 1) |
ESC | Return to CONTROL Menu |
ESC | Return to the MAIN Menu |
2.Connect Input 2 to Output 2.
Starting from the main menu, connect Input 2 to Output 2. Follow the keystrokes below.
1Select CONTROL Menu
At the top of the CONTROL Menu, it should read FOR THIS CARD.
5Select
02Enter Input 2 (2 digits)
02Enter Output 2 (2 digits)
S Show Status
ESC | Return to Control Menu |
ESC | Return to the MAIN Menu |
3.Assign Card 1 to Group 1.
Starting from the Main Menu, assign Card 1 to Group 1. Follow the keystrokes below.
2 Select SETUP Menu
1 Select SET GROUP ID
1 Select ASSIGN GROUP ID
1Assign this card to Group 1
The system will return feedback similar to “[G1=C1]”. Any other cards in Group 1 will also be listed.
ESC | Return to SET GROUP ID Menu |
ESC | Return to SETUP menu |
ESC | Return to the MAIN Menu |
4.Turn on all Group 1 outputs.
Start from the main menu and select Group 1 for control. Next, turn on all outputs for the cards in Group 1. Follow the keystrokes below.
1Select CONTROL Menu
1Select the SELECT Menu
1Select Group 1 for Control
The top of the menu will redisplay and show that the current selection is Group 1.
ESC | Return to CONTROL Menu |
4 | Select ON/OFF menu |
9 | Turn on all outputs |
ESC | Return to the CONTROL Menu |
ESC | Return to the MAIN Menu |
5. Display Card Status
Starting from the Main Menu, follow the keystrokes below.
3 | Displays card status |
NOTE: The status will be displayed, followed by the Main Menu being redisplayed.
21 |
21