DreamGEAR MSK 33 manual Copy Menu, Saving and calling up unit settings, Saving the unit settings

Copy Menu

The copy menu is called up with the copy button. Exit the menu by pressing the but- ton once more.

Saving and calling up unit settings

Saving the unit settings

One hundred memory positions (00-99) are available for saving the settings of the unit. First, select the unit setting, which is to be saved, and then call up the COPY menu. By pressing the softkey „store nr. --“ and entering a second digit by means of the numerical buttons, the last set unit setting is saved under the selected mem- ory position.

The saved settings are displayed on the screen in abbreviated form:

No.

0

1

2

3

4

5

6

Operating

type

T A

T s A

T D

T s D

S A

S D

R A

Frequency (MHz)

210.25M

319.25M

213.00M

338.00M

1597.00M

1990.00M

98.00M

Meaning

TV		analogue
TV	Special channel	analogue
TV		digital
TV	Special channel	digital
SAT		analogue
SAT		digital
Radio		analogue

You can scroll down the setting list by using the cursor buttons, ▲▼.

Calling up saved settings

Saved settings can be called up by entering the memory position. By pressing on this button, the field „recall nr.—“ lights up yellow. Now, the position of the desired memory position can be typed with the numerical buttons. If the called up memory position is not found, the message „NO SETTINGS FOUND“ appears on the screen.

The saved settings are not deleted during a software update, but can be written over by new settings. The memory positions 80...95 are occupied at the factory with the most important DiSEqC commands.

Calls up the panoramic printout menu

This softkey no longer applies to the software versions 7.0 and higher. The pano- ramic printout can only be carried out via the spectrum analysis with the command „COPY“ and „print data.“

61