Allied Telesis 86241-06 manual Patch Release Note

Page 26

26

Patch Release Note

maintenance link allows a number of identification messages to be inserted in to the path overhead of the DS3 signal. These messages are in the form of text characters and allow the users at either end of the DS3 path to ensure that the correct DS3 signal has reached their equipment.

The DIRECTION parameter is used with the EIC, FAC, FIC, LIC or UNIT parameters to specify whether the text string is the text to transmit, or the text to expect in the received signal. If TRANSMIT is specified, the user is specifying a text to be transmitted out on the path. If RECEIVE is specified, the user is specifying the ASCII characters expected on the incoming path. If the DIRECTION parameter is present the TYPE parameter must also be present.

The EIC parameter specifies the Equipment Identification Code. This is 0 to 10 characters in length and describes the equipment at the near end, e.g. “RAPIER SW”. This parameter is only meaningful with the CMTCE parameter set to ON. With CMTCE set to OFF this parameter is ignored. The default pattern is “ignore”.

The FAC parameter specifies the FACility identification code. This is 0 to 38 characters in length and describes the DS3 path.

This data element is called FI in the ANSI specification, it is named FAC in this document to avoid confusion with the FIC parameter.

The FAC parameter is only valid if the TYPE parameter is set to PID. This parameter is only meaningful with the CMTCE parameter set to ON. With CMTCE set to OFF this parameter is ignored. The default pattern is “ignore”.

The FDET parameter specifies whether fast detection of AIS is enabled. If ON is specified, the AIS detection time is 2.23ms. If OFF is specified, the AIS detection time is 13.5ms. The default is ON.

The FIC parameter specifies the Frame Identification Code. This is 0 to 10 characters in length and describes where the equipment is located within a building, e.g. “FRAME 255”. This parameter is only meaningful with the CMTCE parameter set to ON. With CMTCE set to OFF this parameter is ignored. The default pattern is “ignore”.

The GENNO parameter specifies the test signal identification message. It is 0 to 38 characters in length and describes the signal generator that initiates a test message. This parameter is only valid if the TYPE parameter is set to ISIS. This parameter is only meaningful with the CMTCE parameter set to ON. With CMTCE set to OFF this parameter is ignored. The default pattern is “ignore”.

The LIC parameter specifies the Location Identifier Code. This is 0 to 11 characters in length and describes the specific location of the equipment, e.g. “BUILDING 1”. This parameter is only meaningful with the CMTCE parameter set to ON. With CMTCE set to OFF this parameter is ignored. The default pattern is “ignore”.

The PARAM15 parameter specifies the 15-minute counter threshold for all performance monitoring parameters (PES, PSES, SEF, UAS, LES, CES, CSES) between 1 and 900 seconds inclusive. If a trigger has been created, it will assert if the 24-hour count exceeds the value specified in PARAM15. The default is 900 seconds.

Patch 86241-05 for Software Release 2.4.1 C613-10340-00 REV E

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Patch For Rapier Switches PCR Module PIM Level PCR Module IPG LevelPCR Module SWI PCR Module BGP LevelPCR Module SWI Level PCR Module SSH LevelPCR 03064 Module Snmp Level PCR Module Utility LevelPCR 03108 Module Mlds Level PCR 03100 Module Dhcp LevelPCR Module FR, PPP Level PCR 03113 Module Dvmrp LevelPCR Module IPV6 Level PCR 03123 Module Dhcp LevelPCR Module DS3 Level PCR Module Ospf LevelPCR Module IPv6, SWI, IPG, Vlan Network affecting No PCR 02315 Module Snmp Network affecting NoPCR Module DS3 Network affecting No PCR Module IPG, SWI, Vlan Network affecting NoPCR Module Utility Network affecting No PCR Module Install Network affecting NoPCR Module User Network affecting No PCR Module Firewall Network affecting NoPCR Module Ospf IPG Network affecting No PCR Module IPG Network affecting NoPCR Module Network affecting No PCR Module Ping Network affecting NoPCR 02529 Module FIREWALLNetwork affecting No PCR 02523 Module QOS, Utility Network affecting NoPCR Module TELNET, PING, IPV6, Network affecting No PCR 02532 Module FIREWALLNetwork affecting NoPCR Module IPV6 Network affecting No PCR 02538 Module Dvmrp Network affecting NoPCR Module Classifier Network affecting No PCR Module SWI Network affecting NoPCR 02587 Module OSPFNetwork affecting No PCR 02574 Module DVMRPNetwork affecting NoPCR 02579 Module FIREWALLNetwork affecting No PCR 02467 Module Core Network affecting NoPCR 02495 Module Vlan Network affecting No PCR 02469 Module TMNetwork affecting NoPCR Module IPG, PIM, SWI Network affecting No PCR 02498 Module Vlan Network affecting NoPCR Module DNS Relay Network affecting No PCR 02502 Module Ping, IPv6Network affecting NoPCR 02509 Module DVMRPNetwork affecting No PCR Module Vrrp Network affecting NoPCR 02277 Module Dvmrp Network affecting No PCR Module BGP Network affecting NoPCR Module Tpad Network affecting No PCR Module TELNET, TTY Network affecting NoPCR 02294 Module IKMPNetwork affecting No PCR 02303 Module INSTALLNetwork affecting NoPCR 02292 Module IPSECNetwork affecting No PCR 02301 Module IPGNetwork affecting NoPCR Module IPG, ETH Network affecting No PCR Module FR Network affecting NoPCR Module IPG/FIREWALL Network affecting No PCR Module Ipsec Network affecting NoPCR 02348 Module Enco Network affecting No PCR Module PPP Network affecting NoPCR Module BGP, IPG Network affecting No PCR Module SCC, SYN, PPP Network affecting NoPCR 02397 Module Dvmrp Network affecting No PCR Module FFS, FILE, TTY Network affecting NoPCR Module VRRP, TRG Network affecting No PCR Module STP Network affecting No PCR Module Trace Network affecting NoPCR Module SNMP, CORE, SHOW, Network affecting No PCR Module IPG Network affecting No Module VrrpPCR 02457 Module IPV6Network affecting No PCR 02450 Module IPV6Network affecting NoPCR 02452 Module IPv6Network affecting No PCR 02463 Module DVMRP, IPG Network affecting NoPCR Module Switch Network affecting No DS3 Interfaces PCR Module DHCP, IPG Network affecting NoBit Parity Mode Loopbacks DS3 Configuration Patch Release Note Disable DS3 Debug Disable DS3 Test Enable DS3 Debug Create Framerelay Show Framerelay Dynamic Port Security Availability
Top Page Image Contents