Patch | 19 |
PCR: 02398 | Module: IPV6 | Network affecting: No |
The following issues have been resolved:
•It was possible to assign the same network on different IPV6 interfaces
•The loopback address was being added to other interfaces
•The tunnel configuration was not showing correctly in IPV6 configuration commands
RIPv6 now sets the metric of routes for interfaces that are DOWN to 16, and immediately sends responses when the link status of VLAN interfaces changes.
PCR: 02399 | Module: TRACE | Network affecting: No |
The Trace utility has been modified. Previously, Trace sent a group of packets at once and waited for multiple responses in order to assess the minimum, maximum and average time to cover a certain "hop distance" towards the target host. Now Trace sends each packet in each group individually, and waits either for a response or a
PCR: 02401 | Module: IPV6 | Network affecting: No |
Neighbour discovery and PIM6 caused a fatal error when IPv6 was not enabled, or when the IPv6 feature license was not present. This issue has been resolved.
PCR: 02402 | Module: SNMP, CORE, SHOW, Network affecting: No |
| FILE |
SNMP MIB support has been enhanced for CPU utilisation and file statistics. MIB support has been added for Allied Telesyn contact details and fast buffers.
PCR: 02403 | Module: STP | Network affecting: No |
A watchdog timeout occurred when the command ENABLE STP PORT was executed. This issue has been resolved.
PCR: 02406 | Module: IPV6 | Network affecting: No |
A
INTERFACE command now works correctly.
PCR: 02409 | Module: IPG | Network affecting: No |
A warning now appears when the DELETE IP INTERFACE command is executed before the DELETE DVMRP INTERFACE command.
PCR: 02410 | Module: VRRP | Network affecting: No |
VRRP
PCR: 02411 | Module: IPV6 | Network affecting: No |
The SHOW TCP command was not showing the listening status for IPv6.
Patch