Allied Telesis AT-9408LC/SP, AT-9424T/POE manual 10/100/1000Base- T Twisted Pair Port LEDs

Page 35

AT-9400 Series Gigabit Ethernet Switches Installation Guide

Port LEDs

The following sections describe the twisted pair and fiber optic port LEDs.

10/100/1000Base- T Twisted Pair Port LEDs

A twisted pair port has two LEDs labeled L/A (link/activity) and D/C (duplex mode/collisions). The L/A LED indicates the speed and activity on a port. The D/C LED indicates the duplex mode (full- or half-duplex) and the status of collisions on the port.

Table 3 describes the LEDs for the 10/100/1000Base-T twisted pair ports.

Table 3 Twisted Pair Port LEDs

LED

Function

State

Description

 

 

 

 

 

 

 

 

L/A

Link Status

Off

No link is established between the

 

and Activity

 

port and the end node.

 

 

 

 

 

 

Solid

The port has established a link at

 

 

green

1000 Mbps.

 

 

 

 

 

 

Flashing

Packets are being received or

 

 

green

transmitted at 1000 Mbps.

 

 

 

 

 

 

Solid

The port has established a link at 10

 

 

amber

or 100 Mbps.

 

 

 

 

 

 

Flashing

Packets are being received or

 

 

amber

transmitted at 10 or 100 Mbps.

 

 

 

 

D/C

Duplex

Green

The port is operating in full-duplex

 

Mode and

 

mode.

 

Collisions

 

 

 

Amber

The port is operating in half-duplex

 

 

 

 

 

mode. (Only when operating at 10 or

 

 

 

100 Mbps.)

 

 

 

 

 

 

Flashing

Collisions are occurring on the port.

 

 

amber

(Only when operating at 10 or 100

 

 

 

Mbps, half duplex mode.)

 

 

 

 

35

Image 35
Contents Installation Guide Page Electrical Safety and Emissions Standards Translated Safety Statements Contents Page Preface Product Documentation Where to Go First Starting a Management Session Symbol Meaning Description Safety Symbols Used in this DocumentWhere to Find Web-based Guides Contacting Allied Telesis Management Software UpdatesPreface Chapter OverviewOverview Descriptions AT-9408LC/SP SwitchShows the front and back panels of the AT-9424T/GB Switch AT-9424T/GB Switch10/100/1000Base-T Ports Port and SFP System Slot LEDs AT-9424T/SP SwitchShows the front and back panels of the AT-9424T Switch 10/100/1000Base-T POE Ports Port and SFP System Slot LEDs AT-9424T/POE SwitchShows the front and back panels of the AT-9424Ts Switch AT-9424Ts SwitchSFP Slots XFP Slots AT-9424Ts/XP Switch10/100/1000Base-T Ports Card Slot AT-9448T/SP SwitchCompact Flash 10/100/1000Base-T Ports Card Slot AT-9448Ts/XP Switch10/100/1000Base-T Twisted Pair Ports Connector Type Speed Duplex ModeMaximum Distance Cable Type Auto-MDI/ MDI-X Port PinoutsFiber Optic Ports Connector Type Speed Maximum Distance CablingGbic Transceiver Gbic Transceiver SlotsIllustrates an SFP transceiver SFP Transceiver SlotsShows an example of an XFP transceiver XFP Transceiver SlotsModel Ports and Slots Redundant Twisted Pair PortsAT-9400 Series Gigabit Ethernet Switches Installation Guide Compact Flash Card Slot Function State Description Port LEDs10/100/1000Base- T Twisted Pair Port LEDs Fiber Optic Port Transceiver Slot LEDs State Description System LEDsMstr Stack LEDsExpansion Slot Stack Installation GuideTerminal Port Power Over Ethernet Minimum Power Maximum Power Class AT-RPS3204 Redundant Power Supply AC Power Connector Installing the Switch Reviewing Safety Precautions AT-9400 Series Gigabit Ethernet Switches Installation Guide Installing the Switch Selecting a Site Speed Cable Type Twisted Pair and Fiber Optic Cable SpecificationsMaximum Cable Type Maximum Operating Fiber Optic Cable SpecificationsUnpacking the Switch Inserting the Retaining Clip into the Retaining Bracket Installing the Power Cord Retaining Clip AC Switches OnlyAttaching Rack-Mount Brackets Installing the Switch in a RackMounting the Switch in a Rack Installing a Gbic Transceiver Installing Optional TransceiversInstalling an SFP Transceiver SFP Handle Installing an XFP Transceiver Installing an XFP TransceiverInstalling the Switch Cabling the Twisted Pair or Fiber Optic Ports Connecting the AC Power Cord Applying AC Power240VAC 9408 Starting a Local Management SessionAT-9400 Series Gigabit Ethernet Switches Installation Guide Warranty Registration Troubleshooting Power LED is Off Twisted Pair Port Link LED is Off Fiber Optic Port Link LED is Off Transceiver is Installed but the Status is Not Present System Fault LED is Blinking System Fault LED is Steadily On Cannot Establish a Local Out-of-Band Management Session Switch Functions Intermittently Troubleshooting Appendix a Physical SpecificationsAT-9400 Series Dimensions H x W x D Switch AT-9400 Series Weight Switch Environmental SpecificationsCertifications Power SpecificationsRJ-45 Twisted Pair Port Pinouts Pin SignalPinout Pair Property Value AT-9408LC/SP Switch 1000Base-SX Port SpecificationsRJ-45 Style Serial Terminal Port Pinouts RPS 21-pin D-combo Port and Connector PinoutsPin Definition