Allied Telesis AT-9408LC/SP, AT-9424T/POE manual Installing an XFP Transceiver

Installing an XFP Transceiver

AT-9400 Series Gigabit Ethernet Switches Installation Guide

To install an XFP transceiver in the AT-9424Ts/XP or AT-9448Ts/XP Switch, perform the following procedure:

1.Remove the dust plug from a transceiver slot on the switch. Refer to Figure 24.

		COMP	A
		ACT	T-	9448
CL			FLASH		Ts/X
LASE	ASS	1
R PR
		ODUCT
46					P
								RT
		LINK /
48					EJECT
			ACT
			L/A
		49				STA
						CK	S
					1	MS		TATU
						TR			S
						L/A
					2			ULT
					50	L/A	MASTER
						PRES
							RPS
							POWER

Figure 24. Removing an XFP Dust Plug

2.Remove the transceiver from its shipping container and store the packaging material in a safe location.

3.Position the transceiver with the label facing down.

4.Slide the transceiver into the slot until it clicks into place, as shown in Figure 25.

	COM	A
	P
	ACT	T-	9448
CLA		FLASH		Ts/XP
LASER	SS 1
	PRO
	DUCT
46
							RT
	LINK /
48				EJECT
		ACT
		L/A
	49				STA
					CK		STA
				1	M	STR
				2	L/A		FA TUS
							ULT
				50	L/A		MASTER
					PRES		RPS
							P
							OWER

Figure 25. Installing an XFP Transceiver

59