Allied Telesis AT-9424T/POE, AT-9408LC/SP manual Reviewing Safety Precautions

Page 46

Chapter 2: Installing the Switch

Reviewing Safety Precautions

Please review the following safety precautions before you begin to install the switch or any of its components.

Note

The indicates that a translation of the safety statement is available in a PDF document titled “Translated Safety Statements” (613-000990) posted on the Allied Telesis website at www.alliedtelesis.com. This document is also included with the documentation CD that is shipped with the product.

Warning: Class 1 Laser product. L1

Warning: Do not stare into the laser beam. L2

Warning: To prevent electric shock, do not remove the cover. No user-serviceable parts inside. This unit contains hazardous voltages and should only be opened by a trained and qualified technician. To avoid the possibility of electric shock, disconnect electric power to the product before connecting or disconnecting the LAN cables. E1

Warning: Do not work on equipment or cables during periods of lightning activity. E2

Warning: Power cord is used as a disconnection device. To de- energize equipment, disconnect the power cord. E3

Warning: Class I Equipment. This equipment must be earthed. The power plug must be connected to a properly wired earth ground socket outlet. An improperly wired socket outlet could place hazardous voltages on accessible metal parts. E4

Pluggable Equipment. The socket outlet shall be installed near the equipment and shall be easily accessible. E5

Caution: Air vents must not be blocked and must have free access to the room ambient air for cooling. E6

46

Image 46

Contents Installation Guide Page Electrical Safety and Emissions Standards Translated Safety Statements Contents Page Preface Product Documentation Where to Go First Starting a Management Session Safety Symbols Used in this Document Symbol Meaning DescriptionWhere to Find Web-based Guides Management Software Updates Contacting Allied TelesisPreface Overview ChapterOverview AT-9408LC/SP Switch DescriptionsAT-9424T/GB Switch Shows the front and back panels of the AT-9424T/GB SwitchAT-9424T/SP Switch 10/100/1000Base-T Ports Port and SFP System Slot LEDsShows the front and back panels of the AT-9424T Switch AT-9424T/POE Switch 10/100/1000Base-T POE Ports Port and SFP System Slot LEDsAT-9424Ts Switch Shows the front and back panels of the AT-9424Ts SwitchAT-9424Ts/XP Switch SFP Slots XFP SlotsAT-9448T/SP Switch 10/100/1000Base-T Ports Card SlotAT-9448Ts/XP Switch Compact Flash 10/100/1000Base-T Ports Card SlotConnector Type Speed Duplex Mode 10/100/1000Base-T Twisted Pair PortsCable Type Auto-MDI/ MDI-X Port Pinouts Maximum DistanceConnector Type Speed Maximum Distance Cabling Fiber Optic PortsGbic Transceiver Slots Gbic TransceiverSFP Transceiver Slots Illustrates an SFP transceiverXFP Transceiver Slots Shows an example of an XFP transceiverRedundant Twisted Pair Ports Model Ports and SlotsAT-9400 Series Gigabit Ethernet Switches Installation Guide Compact Flash Card Slot 10/100/1000Base- T Twisted Pair Port LEDs Port LEDsFunction State Description Fiber Optic Port Transceiver Slot LEDs System LEDs State DescriptionStack LEDs MstrStack Installation Guide Expansion SlotTerminal Port Power Over Ethernet Minimum Power Maximum Power Class AT-RPS3204 Redundant Power Supply AC Power Connector Installing the Switch Reviewing Safety Precautions AT-9400 Series Gigabit Ethernet Switches Installation Guide Installing the Switch Selecting a Site Maximum Twisted Pair and Fiber Optic Cable SpecificationsSpeed Cable Type Fiber Optic Cable Specifications Cable Type Maximum OperatingUnpacking the Switch Installing the Power Cord Retaining Clip AC Switches Only Inserting the Retaining Clip into the Retaining BracketInstalling the Switch in a Rack Attaching Rack-Mount BracketsMounting the Switch in a Rack Installing Optional Transceivers Installing a Gbic TransceiverInstalling an SFP Transceiver SFP Handle Installing an XFP Transceiver Installing an XFP TransceiverInstalling the Switch Cabling the Twisted Pair or Fiber Optic Ports Applying AC Power Connecting the AC Power Cord240VAC Starting a Local Management Session 9408AT-9400 Series Gigabit Ethernet Switches Installation Guide Warranty Registration Troubleshooting Power LED is Off Twisted Pair Port Link LED is Off Fiber Optic Port Link LED is Off Transceiver is Installed but the Status is Not Present System Fault LED is Blinking System Fault LED is Steadily On Cannot Establish a Local Out-of-Band Management Session Switch Functions Intermittently Troubleshooting AT-9400 Series Dimensions H x W x D Switch Physical SpecificationsAppendix a Environmental Specifications AT-9400 Series Weight SwitchPower Specifications CertificationsPin Signal RJ-45 Twisted Pair Port PinoutsPinout Pair AT-9408LC/SP Switch 1000Base-SX Port Specifications Property ValueRPS 21-pin D-combo Port and Connector Pinouts RJ-45 Style Serial Terminal Port PinoutsPin Definition