AT-9400 Series Gigabit Ethernet Switches Installation Guide
System LEDs
The system LEDs on the front panel display general status information, as described in Table 6.
|
| Table 6 System LEDs | |
|
|
| |
LED | State | Description | |
|
|
| |
|
|
| |
FAULT or | Off | Normal operation. | |
FLT |
|
| |
Solid | The switch or management software has | ||
| |||
| Red | malfunctioned. (Refer to Chapter 3, | |
|
| “Troubleshooting” on page 67 for instructions | |
|
| on how to troubleshoot a problem.) | |
|
|
| |
| Flashing | The switch is saving its configuration or is | |
| Red | downloading a new version of the | |
|
| Management Software. | |
|
|
| |
MASTER | Off | The switch has an enhanced stacking status of | |
or MSTR |
| slave or unavailable. | |
|
|
| |
| Green | The switch has an enhanced stacking status of | |
|
| master. | |
|
|
| |
RPS | Off | No optional redundant power supply is | |
|
| connected to the switch. | |
|
|
| |
| Green | An optional redundant power supply is | |
|
| physically connected to the switch and may be | |
|
| powered on or off. | |
|
|
| |
POWER | Off | The switch is not receiving power. | |
or PWR |
|
| |
Green | The switch is receiving power. | ||
| |||
|
|
|
37