Chapter 2: Installing the Switch
Applying AC Power
To apply AC power to the switch, perform the following procedure:
1.Position the power cord retaining clip in the up position, as shown in Figure 26.
100- |
|
240VAC | ~ |
|
Figure 26. Power Cord Retaining Clip in the Up Position
2.Plug the power cord into the AC power connector on the back panel of the unit (see Figure 27).
Warning: Power cord is used as a disconnection device. To de- energize equipment, disconnect the power cord. E3
Warning: This unit might have more than one power cord. To reduce the risk of electric shock, disconnect all power cords before servicing the unit. E30
. |
|
100- |
|
240VAC | ~ |
|
Figure 27. Connecting the AC Power Cord
62