Allied Telesis AT-9424T/POE manual Installing the Switch in a Rack, Attaching Rack-Mount Brackets

Chapter 2: Installing the Switch

Installing the Switch in a Rack

Perform the following procedure to install the switch in a standard 19-inch rack:

Note

Steps 1, 2, and 3 are optional. They remove the snap-on plastic feet from the bottom of a switch. The feet can be left on.

1.Place the unit upside down on a level, secure surface.

2.Using a flat-head screwdriver, remove the snap-on plastic feet from the bottom of the switch, as shown in Figure 17.

Figure 17. Removing the Feet

3.Turn the switch over.

4.Attach a rack-mount bracket to one side of the switch using four of the screws that come with the switch, as shown in Figure 18.

Figure 18. Attaching Rack-Mount Brackets

54