Allied Telesis 613-001480 manual AT-S94 Version AT-8000S Switch Software Release Notes

Page 1

AT-S94 Version 3.0.0.41

AT-8000S Switch

Software Release Notes

Please read this document before you begin to use the management software.

Caution

Failure to upgrade the bootloader before the release software can result in a switch that will not boot. Please read the upgrade instructions in this SRN carefully.

This document contains the following sections:

ˆ“Supported Platforms” on page 2

ˆ“Product Documentation and Software” on page 2

ˆ“What’s New in Version 3.0.0.41” on page 3

“New Software Features” on page 3

“Resolved Issues” on page 3

“Operational Notes” on page 3

“Known Issues” on page 4

“New Hardware Features” on page 4

ˆ“Version 3.0.0.41 Upgrade Process” on page 5

“Software Installed with Incorrect Bootloader” on page 7

ˆ“History of Resolved Issues” on page 8

ˆ“Features History” on page 9

ˆ“Upgrade Procedure from Version 1.0.0.25” on page 12

ˆ“Contacting Allied Telesis” on page 16

PN 613-001480 Rev A

1

Image 1
Contents AT-S94 Version AT-8000S Switch Software Release Notes Product Documentation and Software Supported PlatformsResolved Issues New Software FeaturesWhat’s New in Version Operational NotesNew Hardware Features Known IssuesRecommended User Work Around Use DVA instead Version 3.0.0.41 Upgrade Process For a stack configuration Software Installed with Incorrect Bootloader Version History of Resolved IssuesLED Description LED Indication Features Historyˆ Dot1x Legacy compliant CLI Command Description of Functionality ˆ 802.1ab Lldp Following 802.1x feature enhancements will be supportedInterim SW Upgrade Procedure from VersionCopy tftp//192.168.1.10/ats94-interim.ros image Copy tftp//192.168.1.10/s94bv10107.rfb boot Reload Contacting Allied Telesis Online Support Email and Telephone Support Warranty