Allied Telesis 613-001480 manual History of Resolved Issues, Version

Page 8

AT-S94 Version 3.0.0.41 Software Release Notes

5.Select number one by pressing the ‘1’ key.

The switch will respond with the following message:

Begin the transmission of a previous version. Downloading code using XMODEM.

You may proceed with the xmodem transfer.

6.When the download is complete, reboot the switch.

7.Install the latest boot loader (s94bv10107.rfb) using the copy command. You may use the xmodem or TFTP options as described in the AT-8000S CLI Reference Guide.

8.Install the Version 3.0.0.41 software by the following steps 6 - 8 in “Upgrade Procedure from Version 1.0.0.25” on page 12.

History of Resolved Issues

Version 3.0.0.40

ˆPC is beginning re-authentication after 30 seconds and this fails although still have connectivity. (CQ 117489 ATI 188)

ˆNAP is not working. (CQ 117116 ATI 199)

ˆOperation MAU in LLDP_MAD MAC/PHY TLV is 0 instead of 16. (CQ 117561 ATI 208)

ˆDoes not learn more than 30 LLDP-MED end points (CQ 121240 ATI 235)

ˆProblem with IGMP Snooping on AT-8000S/48 stack - fatal error. (CQ 121102 ATI 230)

ˆGVRP + LACP - GVRP does not recover after a fail. (CQ 120476 ATI 234)

ˆProblem with IGMP Snooping on AT-8000S/48 stack - fatal error operation - SW2M: ABORT DATA exception. (CQ 122604)

ˆStack issue - broadcast blocked when using “bridge multicast unregistered filtering”. (CQ 122469 ATI 244, ATI 251)

Version 3.0.0.38

ˆudp-mib - definition for udpHCGroup has been commented out. (CQ ID 119274)

ˆThe rlpoe.mib has an incorrect module name. (CQ 118708 ATI 221)

ˆDHCP snooping doesn't work on guest VLAN. (CQ 117217 ATI 204)

ˆThe command “default-vlan vlan” is not available on 8000S. (CQ 118706 ATI 219)

ˆCannot apply IP ACL because of lack of HW resources. (CQ 118117 ATI 214)

ˆThere is no support for MIB counters ifInErrors & ifOutErrors.(CQ 117172 ATI 202)

Version 3.0.0.35

ˆMulticast - When several multicast groups are registered on a port, all will be deleted when an IGMP Leave report for just 1 of the groups is received on the port (CQ ID114173)

ˆEWS - User can not add a VLAN via GUI interface if the VLAN ID starts with 5,6,7,8,9 (CQ ID 115354)

ˆSNMP - Added support for SNMP trap when master stack unit is down (CQ ID 117040)

PN 613-001480 Rev A

8

Allied Telesis, Inc.

Image 8
Contents AT-S94 Version AT-8000S Switch Software Release Notes Supported Platforms Product Documentation and SoftwareNew Software Features Resolved IssuesWhat’s New in Version Operational NotesRecommended User Work Around Use DVA instead Known IssuesNew Hardware Features Version 3.0.0.41 Upgrade Process For a stack configuration Software Installed with Incorrect Bootloader History of Resolved Issues Versionˆ Dot1x Legacy compliant Features HistoryLED Description LED Indication CLI Command Description of Functionality Following 802.1x feature enhancements will be supported ˆ 802.1ab LldpUpgrade Procedure from Version Interim SWCopy tftp//192.168.1.10/ats94-interim.ros image Copy tftp//192.168.1.10/s94bv10107.rfb boot Reload Online Support Email and Telephone Support Warranty Contacting Allied Telesis