Allied Telesis 613-001480 manual For a stack configuration

AT-S94 Version 3.0.0.41 Software Release Notes

6.Assuming your switch is running the correct bootloader, you have the correct password to extract the ats94-30041.ros software upgrade file and you know that your current bootloader is compatible with the Version 3.0.0.41 software. If this is the case, you can proceed with the version 3.0.0.41 software upgrade by following steps 9 - 11. If this is not the case,

7.If your switch is NOT running the correct bootloader version and you can NOT extract the ats94-30041.ros software upgrade file and you must install the latest boot loader file provided (s94bv10107.rfb) by using the following commands:

Note

You must substitute the IP address of your local TFTP server.

For a stand alone switch -

Copy tftp://192.168.1.10/s94bv10107.rfb boot

For a stack configuration -

Copy tftp://192.168.1.10/s94bv10107.rfb unit://*/boot

8. Verify that your switches are running the correct boot loader by using the following command:

show version

With information displayed from the “show version” command, copy the boot version number exactly as shown. Using this number as the password, extract the ats94-30041.ros software upgrade file from the ats94-30041.zip file.

9. Use one of the following commands depending on your configuration:

Note

You must substitute the IP address of your local TFTP server.

For a stand alone switch -

Copy tftp://192.168.1.10/ats94-30041.ros image

For a stack configuration -

Copy tftp://192.168.1.10/ats94-30041.ros unit://*/image

PN 613-001480 Rev A 6 Allied Telesis, Inc.